VRRP LAB Configuration | Gateway Redundancy Explained | Tech Guru Manjit #techgurumanjit

Learn VRRP (Virtual Router Redundancy Protocol) step by step in this Cisco Packet Tracer Lab with Tech Guru Manjit (TGM Academy).

In this video, you’ll understand how to configure VRRP for Gateway Redundancy between two routers, test failover, and see how network availability improves using redundant routers.

📘 What You’ll Learn:
What is VRRP and how it works
Difference between VRRP, HSRP, and GLBP
VRRP Configuration commands
How to set Active and Backup routers
VRRP priority and preemption explained
Practical verification in Packet Tracer

⚙️ Lab Devices Used:
2 Cisco Routers (R1, R2)
1 Switch
1 PC
Cisco Packet Tracer

R1(config)# interface g0/0
R1(config-if)# ip address 192.168.1.1 255.255.255.0
R1(config-if)# vrrp 1 ip 192.168.1.10
R1(config-if)# vrrp 1 priority 110
R1(config-if)# vrrp 1 preempt

📚 Related Topics:
HSRP LAB Configuration
GLBP LAB Setup
Gateway Redundancy Concepts

👨‍💻 Instructor: Tech Guru Manjit
🌐 Website: https://tgmacad.com
📲 Follow for more: @techgurumanjit

VRRP lab configuration
VRRP configuration cisco
VRRP practical lab
Cisco VRRP explained
VRRP tutorial for beginners
gateway redundancy configuration
Cisco Packet Tracer VRRP
VRRP vs HSRP vs GLBP
VRRP priority configuration
VRRP failover lab
redundant router configuration
Tech Guru Manjit VRRP
TGM Academy networking
CCNP redundancy protocols
CCNA practical lab
VRRP configuration step by step
Cisco networking tutorial
network redundancy explained
VRRP router configuration
vrrp cisco commands

#VRRP #Cisco #Networking #CCNA #CCNP #NetworkLab #GatewayRedundancy #PacketTracer #NetworkEngineer #CiscoTraining #TechGuruManjit #TGMAcademy #NetworkingTutorial #VRRPLab #routerconfiguration

Видео VRRP LAB Configuration | Gateway Redundancy Explained | Tech Guru Manjit #techgurumanjit канала Tech Guru Manjit