How to: Replace outer tie rod ends (Ford)
How to: Change outer tie rod ends on your steering track rod, with an effort to maintain alignment.
Video on how to check and diagnose the outer and inner track rod: https://youtu.be/DerpCk-nsvQ
The vehicle featured is a Ford Mondeo Mk3 (2002) but this process is generic.
You will need:
* Replacement tie rod end(s), with replacement stud nuts. You can usually find on Amazon ~ US: http://amzn.to/2h4SGUT | UK: http://amzn.to/2gYbMIj
* Spanner or crowfoot attachment for bar to suit track rod lock-nut (24 mm shown). An adjustable spanner may turn a nut that's not tight
* Adjustable spanner or vise-grips (locking pliers) to hold tie rod while turning lock-nut
* Socket and spanner to suit stud nut (15 mm shown)
* Hex key to suit stud (depending on design)
* Breaker bar
* Ratchet handle (convenient)
* Hammer
* Torque wrench (important for tightening the stud nut on the ball joint). The wrench in the video ~ Amazon US: http://amzn.to/2g1zGoJ | UK: http://amzn.to/2gJ7sAg
* Thread locker if re-using old stud nut.
(Using the above Amazon links helps support my channel and is appreciated!)
Видео How to: Replace outer tie rod ends (Ford) канала Craig's DIY Car
Video on how to check and diagnose the outer and inner track rod: https://youtu.be/DerpCk-nsvQ
The vehicle featured is a Ford Mondeo Mk3 (2002) but this process is generic.
You will need:
* Replacement tie rod end(s), with replacement stud nuts. You can usually find on Amazon ~ US: http://amzn.to/2h4SGUT | UK: http://amzn.to/2gYbMIj
* Spanner or crowfoot attachment for bar to suit track rod lock-nut (24 mm shown). An adjustable spanner may turn a nut that's not tight
* Adjustable spanner or vise-grips (locking pliers) to hold tie rod while turning lock-nut
* Socket and spanner to suit stud nut (15 mm shown)
* Hex key to suit stud (depending on design)
* Breaker bar
* Ratchet handle (convenient)
* Hammer
* Torque wrench (important for tightening the stud nut on the ball joint). The wrench in the video ~ Amazon US: http://amzn.to/2g1zGoJ | UK: http://amzn.to/2gJ7sAg
* Thread locker if re-using old stud nut.
(Using the above Amazon links helps support my channel and is appreciated!)
Видео How to: Replace outer tie rod ends (Ford) канала Craig's DIY Car
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How to Change Tie Rods (inner and outer tie rod ends)Outer tie rod end replacement (2001-2012 Ford Escape)How to Replace Inner Tie Rods 00-05 Ford Focus No Special Tools NeededFord Fusion: Front Lower Control Arms / Tie Rod / Tire /Alignment - PART IHow to Perform a Front End Alignment Yourself - Easy and FreeHow to Replace Inner Tie Rod 07-14 Ford EdgeFord Van/Truck Replacing Tie Rod Ends - Sloppy Steering FixHow to: Check track rod and inner/outer tie rod ends for wearFord Fusion control arm and ball joint replacementThe best inner tie rod tool?How to Replace Inner Outer Tie Rod Ends Ford FusionFORD FIESTA OUTER TIE ROD REPLACEMENT REMOVAL MK7 STWhat A Bad Sway Bar Bushing Sounds Like & How To ReplaceHow To Replace Track Rod Ends And Realign Tracking | Wheeler DealersHow To Replace An Outer Tie Rod End ProperlyHow to Tell if Your Tie Rod is Bad2006-2012 Ford Fusion 2WD Rear Wheel Bearing ReplacementHow to Replace Driver Side Outer Tie Rod 07-14 Ford EdgeHow to Replace an Outer Tie Rod End