DDCSV3.1 / RMHV3.1 RATTM MOTOR CNC Offline Controller Menus / Parameters List

***This offline controller does not need a Break Out Board. Drivers are wired directly to this controller. I save files as a "G-Code Arcs(mm)(*.tap)" file in the post processor.***

Now that I have the CNC built and have used the unit a bit this is a video of the RATTM MOTOR Offline Controller / DDCSV3.1 Menus and Parameters List. I forgot to mention in the video that this controller replaces the breakout board and the need for the UC100 in most instances that I have seen. With no need to connect directly to a PC it removes the need for some adapters.

The software that I use is V-Carve Pro. I save files as a "G-Code Arcs(mm)(*.tap)" in the post processor when saving files to USB drives. From there the USB drive can be inserted into controller to run file.

Offline Controller: https://www.amazon.com/RATTMMOTOR-Linkage-Controller-Handwheel-Engraving/dp/B075HBB8VJ/ref=sr_1_1?keywords=rattmmotor+offline+controller&qid=1574050816&sr=8-1
DDCSV Manual: http://www.variometrum.com/PDF/RMHV21_PLC_offline_control_user_manual.pdf

CNC:https://www.davegatton.com/gatton-cnc

Видео DDCSV3.1 / RMHV3.1 RATTM MOTOR CNC Offline Controller Menus / Parameters List канала JFabrications