FPV RC car built from scratch with drone hardware (DIY)

This DIY RC car was built using a brushless motor and spare parts that I use on my FPV drone. This includes camera with VTX and antenna, ESC, brushless motor, TBS crossfire receiver and lipo battery. The ratio of the motor is 1:4 to reduce the power. Also i use just the 30% of power to control the car

The part i use:
https://www.creality.com/products/ender-3-pro-3d-printer

https://www.ebay.com/itm/115529163464

https://www.diatone.us/products/mamba-toka-2207-5-series-racing-motor

https://www.getfpv.com/immersionrc-tramp-hv-5-8ghz-video-tx.html

https://www.diymore.cc/products/atmega328p-ch340g-uno-r3-board-mini-usb-compatible-with-arduino-uno-r3?_pos=1&_sid=661381336&_ss=r

https://www.drone-fpv-racer.com/en/tbs-crossfire-nano-rx-se-2858.html

https://www.drone-fpv-racer.com/en/t-motor-ultra-f55a-4in1-mini-esc-7041.html

https://www.team-blacksheep.com/products/prod:sma_stub_triumph_r

https://www.diymore.cc/products/4pcs-sg90-9g-mini-micro-servo-for-rc-250-450-helicopter-airplane-plane-boat-car-helm-aircraft-model?_pos=4&_sid=18aab1573&_ss=r

Видео FPV RC car built from scratch with drone hardware (DIY) канала TomStell