etrailer | Review of Tie Down Boat Trailer Parts - Tie Down Bracket - TD56FR

Click for more info and reviews of this Tie Down Boat Trailer Parts:
https://www.etrailer.com/Boat-Trailer-Parts/Tie-Down/TD56FR.html
Check out some similar Boat Trailer Parts options:
https://www.etrailer.com/dept-pg-Boat_Trailer_Parts-sf-Bunks.aspx

https://www.etrailer.com
Don’t forget to subscribe!
https://www.youtube.com/user/etrailertv

Full transcript: https://www.etrailer.com/tv-Demo-Tie-Down-Boat-Trailer-Parts-Tie-Down-Bracket-TD56FR.aspx
Hi, everyone. Steve here with etrailer.com. Today, we're looking at our Tie Down Bracket for Vertical Boat Bunks. Now, this is eight inches long and it has a wide five-inch plate that's gonna support tall bunk sides and that the hole will ride steady and the load will load predictability and straight. So, this is going to resist twisting. It's a thick steel, so it's not gonna flex or twist on you.

It's gonna keep your boards from walking on those long hauls and you can pair this with aluminum trailers. The stout support works well with aluminum frames and I-beam layouts. Now, this has been hot-dip galvanized, so you don't have to worry about rust, corrosion, those kind of things, and these are sold in one, quantity one. Again, eight inches tall, five inches wide, 1/4 inch thick, weighs about three pounds. This was gonna do the job and then some.

So folks, this is the Tie Down Bracket for Vertical Boat Bunks, eight inches long. I'm Steven, thanks for watching.

Видео etrailer | Review of Tie Down Boat Trailer Parts - Tie Down Bracket - TD56FR канала etrailer