Making a segmented rosette // Florentine Cutaway Guitar Build part 4
I made the rosette out of a padauk pen blank I‘ve had laying around for years. I cut the pen blank into 2.5mm thick slices. After joining the segments and sanding one side flat, it ended up right around 2mm thick. I cut the inlay channel for it into the top around 1.6 to 1.7mm deep.
Here‘s the website I used to calculate the size and angles to cut the segments of the rosette:
https://bit.ly/3uEhQhb
My Website: https://www.MakeCookFix.com
////////////////////////social links///////////////
My DIY & Cooking channel : https://goo.gl/QPEUpP
INSTAGRAM : https://goo.gl/QhsLBT
FACEBOOK: https://goo.gl/XH4kT5
Видео Making a segmented rosette // Florentine Cutaway Guitar Build part 4 канала CMR Woodworks & Guitars
Here‘s the website I used to calculate the size and angles to cut the segments of the rosette:
https://bit.ly/3uEhQhb
My Website: https://www.MakeCookFix.com
////////////////////////social links///////////////
My DIY & Cooking channel : https://goo.gl/QPEUpP
INSTAGRAM : https://goo.gl/QhsLBT
FACEBOOK: https://goo.gl/XH4kT5
Видео Making a segmented rosette // Florentine Cutaway Guitar Build part 4 канала CMR Woodworks & Guitars
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Guitar Mold and Tru-Oil Finish // Guitar building chronicles no.2](https://i.ytimg.com/vi/IT64phl0sFA/default.jpg)
![Cutting fret slots and attaching the back // Forentine Cutaway Guitar Build part 6](https://i.ytimg.com/vi/_Y3rI8sB-L0/default.jpg)
![My first electric guitar build part 2 - neck and spoke nut truss rod](https://i.ytimg.com/vi/xdz7qsnUimY/default.jpg)
![Making kerfing from scratch](https://i.ytimg.com/vi/Q5jDz0jZ2j0/default.jpg)
![Handplane shavings](https://i.ytimg.com/vi/ZRgQUzGrWFk/default.jpg)
![Fretwork and setup - series finale! // Florentine Cutaway Guitar Build part 13](https://i.ytimg.com/vi/xGKdzryNllM/default.jpg)
![Shop Update 08-2014 (CMRW#14)](https://i.ytimg.com/vi/tB1OkcsUK3o/default.jpg)
![My first electric guitar build part 3 - fretboard install and neck pocket](https://i.ytimg.com/vi/GN_QCCdRBW8/default.jpg)
![Sitka spruce from Martin in the 80‘s // Guitar building chronicles no.3](https://i.ytimg.com/vi/inLLDei9evo/default.jpg)
![What is up? | Shop Update 07-2014 (CMRW#12)](https://i.ytimg.com/vi/RXzjlL-c9yk/default.jpg)
![Organ Leg Coat Rack Part 4 (CMRW#4)](https://i.ytimg.com/vi/D_STCn7xmlY/default.jpg)
![StewMac Ukulele Kit part 8 // finishing up and it's done!](https://i.ytimg.com/vi/_DnTvhWmJxU/default.jpg)
![First pen on my new lathe - cocobolo pen](https://i.ytimg.com/vi/m6xsj9IxK0w/default.jpg)
![Guitar Build / SHORT VERSION part 5 / bracing the top, closing the box, and binding](https://i.ytimg.com/vi/Q2lXqRRMy7o/default.jpg)
![Carved Mandolin Build part 2 // making and installing kerfed linings](https://i.ytimg.com/vi/8r6kmfJjemY/default.jpg)
![Checking neck centering #guitarbuilding](https://i.ytimg.com/vi/bE9gXkH4nLU/default.jpg)
![My 3rd guitar build (with commentary) // PART 1](https://i.ytimg.com/vi/bWzdhJ4MRr8/default.jpg)
![Ebony alternative for guitar building from Thermalwood Canada](https://i.ytimg.com/vi/LFyOBrSc43Q/default.jpg)
![I made my own kerfed linings for my mandolin build #lutherie](https://i.ytimg.com/vi/LeTvd06g2UM/default.jpg)
![Guitar Build / SHORT VERSION part 6 / making the neck and headstock](https://i.ytimg.com/vi/WJNY450-YxA/default.jpg)