Chargery BMS, watch before buying!
More info:
1. Contacted Chargery support, they asked me to measure resistance between balancing pins, measurements was correct, so only solution they offered is to send BMS back to repair.
2. Issue with 1st BMS was similar, but it was draining only 1 cell (#15). At that time it was connected to 16s1p 7.5kWh pack. I tried to switch highest and lowest voltage cells in pack, and after few cycles #15 will go again out of balance. This tells me that issue was not related to cells resistance
3. After assembling 16s3p 23.5kWh pack I left it for 1 week (no BMS, no balancer connected), then it was discharged and charged back to 3.6 and all cells was in 5mV diff. That tells me that pack itself is fine. When I connecting BMS, pack will disbalance after few days.
23.5kWh LiFePo4 pack: https://youtu.be/RB_O_5Ppv7g
Видео Chargery BMS, watch before buying! канала SolarEngineering
1. Contacted Chargery support, they asked me to measure resistance between balancing pins, measurements was correct, so only solution they offered is to send BMS back to repair.
2. Issue with 1st BMS was similar, but it was draining only 1 cell (#15). At that time it was connected to 16s1p 7.5kWh pack. I tried to switch highest and lowest voltage cells in pack, and after few cycles #15 will go again out of balance. This tells me that issue was not related to cells resistance
3. After assembling 16s3p 23.5kWh pack I left it for 1 week (no BMS, no balancer connected), then it was discharged and charged back to 3.6 and all cells was in 5mV diff. That tells me that pack itself is fine. When I connecting BMS, pack will disbalance after few days.
23.5kWh LiFePo4 pack: https://youtu.be/RB_O_5Ppv7g
Видео Chargery BMS, watch before buying! канала SolarEngineering
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Solar Kit review 5kW Inverter and 5.12kWh Battery from CalphaChargery BMS update firmware on Main & LCD modules to v4.0Chargery BMS. Package and settings walk-trough.Installing 4 solar panels for Ecoflow Delta ProSolar battery backup for home. Sol-Ark 15k with Stackrack batteries.Will Enphase microinverter work without combiner box? Simplest grid-tie solar system.Replacing dead Enphase m250 microinverters. Fixing grid-tie solar PV system.Installing racking system for solar panels on composite shingles roof.Installation of 4 Solar panels for Ecoflow Delta ProI cleaned up solar panels, how much extra production I got?Step-by-Step Guide: Installing Ironridge All Tile Hook on Concrete Flat Tile Roof for Solar PanelsFull home battery backup with solar panels and Tesla Powerwall. 9kW solar array, 27kWh batteryLuxpower 12k with Stackrack batteries. Sunset for Sol-Ark?5 areas to avoid on the roof while installing solar panels.Etaker M2000 power station test/review. 240 Split phase system.Full test of Maxkgo 4S 200A LiFePo4 BMS with active balancer.EcoFlow River 2 solar power station.Installation of Iron Ridge knockout tile for clay tile roof.Full home battery backup with Sol-Ark 15k and EG4 Powerpro. Full installTools and components to build and test lithium batteries and equipment.Chargery BMS calibrate shunt and install relays. Part 2.