HiAll fixed my DIY BGA Rework Station BEAST – Part 2 It's Actually Working Now!

In Part 2 of the BEAST videos, I finally got the station running properly! I swapped in the Yarboly PC410 controller (borrowed from my other rework station) and the difference is night and day.
Watch as the 6000W bottom heater array now follows temperature profiles accurately and reliably. I also explain why setting OUT2 to HiAll on the PC410 is so important when driving a high-power heater array like this one.
OUT2 in stations like ACHI, BAUER, SCOTLE, LY is just used to turn the bottom heaters on, no control. PSoft Software takes control over this output so we can have much more reliable heating profile.
Then I put the machine to the test with a real de-soldering job: removing the CELL CPU from a PS3 Slim logic board — clean lift with no pad damage.
⚠️ SAFETY DISCLAIMER
This project uses 240V and over 6000W of bottom heating power. It involves high voltage, high temperatures, and significant electrical risk. This is an advanced DIY project only — not suitable for beginners. Improper wiring or use can result in fire, electric shock, or serious injury. I am not an electrician. This video is for educational and entertainment purposes only. Always follow local electrical codes and safety practices.

If you're building your own BGA rework station or struggling with PC410 controllers (especially clones), this video will save you a lot of headaches.
Drop a comment:

Have you had issues with knockoff PC410s?
What BGA chip should I tackle next?

🔥 Like the video if you want to see more BEAST upgrades!

Links:

Watch Part 1:
https://www.youtube.com/watch?v=N0Rgs4iMRUA

PSOFT software
https://www.elvikom.pl/nowy-soft-dla-achi-scotle-ly-bauer-itp-t30366.html
Need to register

Thanks for watching — stay safe and keep building!
#BGARework #DIYReworkStation #BGAStation #PS3Repair #ElectronicsRepair #BGA rework #PC410 #PSOFT

Видео HiAll fixed my DIY BGA Rework Station BEAST – Part 2 It's Actually Working Now! канала RadPaw