Making a DIY motorcycle wheel balancer.

Dino’s Tinker Shed, S3 Ep14, Making a DIY motorcycle wheel balancer.
In this episode, I will show you how I constructed my homemade motorcycle wheel balancer to balance the front tire on my Suzuki Dr650. The balancer is a simple construction and something most DIYers should be able to handle with some basic hand tools and some patience.
Overall I spent around $30 Canadian not including the ¾” plywood scraps I had laying around the shop.
I will show you the actual balancing in a follow up video in the not-too-distant future.
As always, I have included time code chapters so you can skip around the video as you see fit.
Moto Dans YouTube channel:
@MOTODANS
Moto Dans Wheel Balancer:
www.youtube.com/watch?v=aT6vTmiQVGc

TIME CODE CHAPTERS:
00:00- Cold opening
01:02- Introduction
01:22- Overview
03:14- Moto Dans
04:13- Parts list
05:24- Modifying the straps.
05:35- Bearings
06:08- Mounting the bearings.
07:36- Wood forks
08:11- Laying out the bearing assembly
09:30- attaching the bearings.
10:06- Metal bracket installation
10:43- Base plate
11:35- Leveling system
14:44- Installing threaded wood inserts.
15:31- My father in law
16:26- Installing the bolts and brackets
17:21- Mounting the forks
18:22- About the axle
20:07- Summary
MUSIC:
Country Cue 1 by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/by/4.0/
Artist: http://audionautix.com/
Delusion 32 by Audionautix is licensed under a Creative Commons Attribution 4.0 licence. https://creativecommons.org/licenses/by/4.0/

Artist: http://audionautix.com/

Видео Making a DIY motorcycle wheel balancer. канала Dino's Tinker Shed