Mosquito XET Turbine. Private Helicopter For Less Than $50,000
Become a MojoGrip MVP https://mojogrip.net/mvp
More on the Mosquito helicopter here http://www.composite-fx.com
Subscribe for MORE: https://goo.gl/1VMCk5
Support Mojogrip on Patreon https://patreon.com/mojogrip
3 years ago I covered this ultralight helicopter at a drone expo. Unfortunately, I didn’t give a proper view of the Mosquito helicopter so in this video I am doing a more in-depth review and first impression of the aircraft.
Mosquito Helicopter is an ultralight single seat helicopter produced by Composite FX down in Florida. This aircraft is an ultralight and is in the experimental category. Meaning you can build one yourself after buying your kit and engine.
You do have different options with engine choices and avionics. The Mosquito helicopter can be fitted with a piston engine or a turbine engine. Typical cost for piston engine models are right around $50,000 finished. For a turbine engine you’re looking at double the price mainly because of the price of the turbine engine. The specific model showcased in this video is the XET model which is fitted with a 95HP turbine engine. The helicopter will climb at 1200 feet per minute and can cruise at 80 miles per hour.
This is a sweet little ride for the fun and adventures pilot. Training is required to operate your helicopter. For more details you can reach out to Composite FX.
Music:
http://purple-planet.com
Видео Mosquito XET Turbine. Private Helicopter For Less Than $50,000 канала MojoGrip
More on the Mosquito helicopter here http://www.composite-fx.com
Subscribe for MORE: https://goo.gl/1VMCk5
Support Mojogrip on Patreon https://patreon.com/mojogrip
3 years ago I covered this ultralight helicopter at a drone expo. Unfortunately, I didn’t give a proper view of the Mosquito helicopter so in this video I am doing a more in-depth review and first impression of the aircraft.
Mosquito Helicopter is an ultralight single seat helicopter produced by Composite FX down in Florida. This aircraft is an ultralight and is in the experimental category. Meaning you can build one yourself after buying your kit and engine.
You do have different options with engine choices and avionics. The Mosquito helicopter can be fitted with a piston engine or a turbine engine. Typical cost for piston engine models are right around $50,000 finished. For a turbine engine you’re looking at double the price mainly because of the price of the turbine engine. The specific model showcased in this video is the XET model which is fitted with a 95HP turbine engine. The helicopter will climb at 1200 feet per minute and can cruise at 80 miles per hour.
This is a sweet little ride for the fun and adventures pilot. Training is required to operate your helicopter. For more details you can reach out to Composite FX.
Music:
http://purple-planet.com
Видео Mosquito XET Turbine. Private Helicopter For Less Than $50,000 канала MojoGrip
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
A600 Talon Private Helicopter Fly From Your DrivewayMosquito XETMosquito helicopterThe Cheapest Turbine Helicopter In The World l Helicycle10 Smallest Helicopters and Cheapest Ultralight Kits You Can Actually OwnTOP 5 CHEAPEST Helicopters You Can Buy!Hovering a Helicopter is Hilariously Hard - Smarter Every Day 145Mosquito XET Turbine Helicopter Walkaround and Flight (SOLD)Curti Zefhir - an ultralight cutieMosquito Helicopter | Detailed Factory Tour | How It's Made | Engineering | Must Watch!Student Pilot gets into Ground Resonance when Picking Up to Hover during First Solo Flight2018 Mosquito Fly In: Air and 285First Flight in my Turbine Experimental HelicopterMosquito XET Turbine Helicopter l Full Demo FlightFirst Helicopter Lesson! Robinson R44Flying the Helicycle "Turbinator"Mosquito Helicopter Engine Choices | ExperimentalBuild a Helicopter from a KIT! - Rotorway 2 Seater Turbocharged10 Cheapest Ultralight Helicopters You Can Buy