Replacing A Dishwasher: Remove An Old Dishwasher and Install A New Dishwasher & Must Use New Adapter

The new dishwasher matches the color of kitchen and is larger and quieter. It uses water more efficient. This video shows each step how you remove the old dishwasher and install a new one.

When you buy a new dishwasher, they want to sell you some new adaptor, you think you can re-use the old adapter, however in this case you can't replace the old with the new easily without buying a new adapter /fixture. Dishwasher Water Inlet Fitting for old dishwasher is different from the new dishwasher.

First you need to deal with three interfaces: electrical, water supply and drain pipe. The electrical power cable can be disconnect. water supply valve can be shut off. The Tools needed are discussed in the video. When we moved dishwasher out, we noticed that the water supply hose is not long enough, thus the water supply hoses needed to be disconnected. There is a electrical box on the dishwasher, wires need to be connected correctly.

The new dishwasher is larger and has a lot of racks. It runs very quietly.

Index
0:00 compare old dishwasher with new dishwasher
0:30 dishwasher elbow (water inlet fitting)
0:52 tools needed
1:13 3 interfaces: electrical, water supply, drain pipe
1:34 disconnect electrical, shut water supply off
2:03 remove two dishwasher screws, move dishwasher out
2:23 water supply hose is not long enough
3:04 remove electrical box and wires
3:24 drain pipe is long enough
3:50 connect drain hose
4:10 electrical box
4:47 water supply inlet elbow
5:07 connect electrical wires
5:41 door top is caved in, program dishwasher first & then close door
6:09 inside racks
6:29 accidental bump to the panel triggering programs
7:04 dishwasher demo operation, very quiet

I hope the video can save you the time and money when you replace it yourself.
http://handymanfix.com/replacing-a-dishwasher/

Видео Replacing A Dishwasher: Remove An Old Dishwasher and Install A New Dishwasher & Must Use New Adapter канала Genius Asian