Underground to Final Inspections [IRC/CRC] - The Sequence of Building Inspections

This video outlines the sequence of building inspections in order that they are generally done by jurisdictions, and as indicated in the International Residential Code's Administrative Chapter R109.

The International Code are the model code to most all the State Codes.

Please note that this is not a detailed list of inspection requirements. Future videos will focus on inspection specifics, so subscribe and stay tuned!

Below is the Sequence of Building Inspections as described on the video.

Intro -- 0:00
General Information -- 0:24
Start -- 1:30
Underground/Underslab Utilities Inspection -- 1:36
Foundation Inspection -- 2:23
Concrete Slab Inspection -- 2:57
Subfloor Inspection (For Structures of Raised Floor Framing, Not Slab-On-Grade) -- 3:19
(a) Underfloor Insulation -- 3:51
Roof Sheathing Inspection -- 4:09
Exterior Shear Wall Inspection -- 4:47
Rough Trades Inspections -- 5:45
(a) Rough Electrical Inspection -- 5:56
(b) Rough Plumbing Inspection -- 6:10
(c) Rough Mechanical Inspection -- 6:20
(d) Rough Framing Inspection -- 6:43
Wall and Ceiling Insulation Inspection -- 7:20
Exterior Lath Inspection -- 7:40
Gypsum Board Inspection -- 8:08
(a) Interior Lath/Shower Pan Inspection -- 8:36
Building Final Inspection -- 8:52
*******************************************************************************************************

Links:

Code Check [Building Codes Illustrations and Resources] -- https://codecheck.com/

FEMA Flood Hazard Map -- https://msc.fema.gov/portal/home

Видео Underground to Final Inspections [IRC/CRC] - The Sequence of Building Inspections канала Building Code Buddy Online