Datasheets: 16x2 LCD By Hand (No microcontroller)
First video in a series dedicated to reading datasheets.
This video focuses on a datasheet for a 16x2 LCD, which is simple enough that it can be programmed by hand (without a microcontroller).
LCD Datasheet: https://www.sparkfun.com/datasheets/LCD/ADM1602K-NSW-FBS-3.3v.pdf
Видео Datasheets: 16x2 LCD By Hand (No microcontroller) канала Mitch Davis
This video focuses on a datasheet for a 16x2 LCD, which is simple enough that it can be programmed by hand (without a microcontroller).
LCD Datasheet: https://www.sparkfun.com/datasheets/LCD/ADM1602K-NSW-FBS-3.3v.pdf
Видео Datasheets: 16x2 LCD By Hand (No microcontroller) канала Mitch Davis
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Using LCD Displays with Arduino
STM32 Guide #1: Your first STM32 dev board
How a Character LCD works Part 1
Bare-Metal MCU #9 - Review; ATTiny85 from scratch
Connecting an LCD to our computer — 6502 part 4
Bare-Metal MCU #3 - Barebones Microcontroller
Bare-Metal MCU #7: Libraries (Preprocessor & Linker)
STM32 Guide #4: Generated Code, HAL, and Bare Metal
(16x2) LCD display with Arduino || without I2C module || Simple tutorial
Arduino LCD Tutorial | How To Control An LCD
Using an EEPROM to replace combinational logic
EEVblog #1045 - How To Drive an LCD
Bare-Metal MCU #4 - Bootloaders and Programmers
BitBastelei #177 - 7-Segment-"Cloud"-Anzeige (1/2)
LCD repair
Bare-Metal MCU #6: Compilers, Assemblers, and Friends
You can learn Arduino in 15 minutes.
Lecture 24: Basics of LCD Interfacing | LCD interfacing with microcontroller
HACKED!: Laser Diode from DVD Burner || Constant Current Source
STM32 Guide #2: Registers + HAL (Blink example)