Build this Revolutionary Cross Cut Sled, for Newbies!

(Index is below.) Detailed, step-by-step instructions for building this revolutionary new cross-cut sled that works without having to remove your blade guard. Let's start a blade guard revolution!

--------------------------------------------------

All Links are on the Project Website, with pictures:
https://thenewbiewoodworker.com/blade-guard-sleds

They're also below, if you'd prefer.

--------------------------------------------------

Index

00:00 Start
01:29 Cutting the Base
01:52 Cutting the Fence
02:55 Gluing the Fence
03:51 Cutting the Runners
06:19 Marking the Base
07:21 Attaching the Runners with Glue
09:00 Attaching the Runners with Screws
14:54 Cleaning Up the Fence
15:43 Cutting the Kerf
16:20 Attaching the Fence
19:02 Aligning the Fence
21:41 Notch Prep (lousy name)
23:36 Cutting the Notch
25:06 Finishing Up the Fence
26:11 Reattaching the Fence
27:23 Testing the Results
27:55 Adding the Rear Support
29:18 Waxing, and a Tip
30:02 Closing

Other Videos mentioned in this video:

Half-Sled Build: https://youtu.be/nyNimyc2UeY
Introductory Video: https://youtu.be/AlUCDzM3gzY
Cleaning Up My (S)Crap: https://youtu.be/BG-HGjoGvhE
Woodworking Distractions, ADD and my StupidStop: https://youtu.be/WFNgPWYDxqw
This Pull Saw is Awesome!: https://youtu.be/UxBlUDKrln8
Easy! Make Runners for Table Saw Sleds!: https://youtu.be/0gvx-_YipOs
Runners for Ryobi/Craftsman Tabbed Miter Slots: https://youtu.be/bKIXUw7IhlY
Micro Adjusters for Table Saw Fences: https://youtu.be/dGZ_V_zwNMQ
Easy! Cut Thin Strips On Your Table Saw!: https://youtu.be/GUXa37VEZ2o
Chisel Plane: https://youtu.be/g5unV5jTNI4
Simple! Portable Sanding Station (Downdraft Table): https://youtu.be/YzfiIdoDgeE

All Products featured in my videos: https://thenewbiewoodworker.com/products/

Products seen in this video:

Featherboard (Hedgehog): https://amzn.to/2sV9kx8
Center Hole Punch: https://amzn.to/2xAhla6
Screws - GRK - #8 x 2”: https://amzn.to/35qoubn
Tap & Drill Bit Set - 1/4” x 20: https://amzn.to/2JhFd6i
Drill Bit - Forstner - 3/4” (Freud): https://amzn.to/2K3R1ux
Caliper - Fractional Dial: https://amzn.to/2Ey9Sun
Framing Square - 12 1/2” x 8” (Johnson): https://amzn.to/2DY01gG
Precision Steel Squares (Kaufhof): https://amzn.to/2E8K8HN
Drill (Makita): https://amzn.to/2XAC90G
Dust Mask: https://amzn.to/2VhvqY7
T-Square - 36” (Alvin): https://amzn.to/2IeMJBZ
Micro Jig Grr-Ripper: https://amzn.to/2CELfvw
Measuring Tape - Lefty/Righty (FastCap): https://amzn.to/36IAZ3b
Pull Saw - 12” (Irwin): https://amzn.to/38opMGL
Push Block (Bench Dog): https://amzn.to/2Fv6AJ2
Remote Control Outlet Switch (Westek): https://thd.co/2DatBOL
FastCap Glu-Bot Glue Bottle (16 Ounces): https://amzn.to/2Kn9008
Clamp - 12” (Jorgensen): https://amzn.to/31iI4Vl
Silicone Project Mat (Rockler): https://amzn.to/2DdhhST
Incra 12” Precision Marking T-Rule: https://amzn.to/2JpF5Ek
Incra 6” Precision Marking T-Rule: https://amzn.to/2HQHdCT
Abrasive Cleaning Stick: https://amzn.to/2CcB93Z
Belt & Disc Sander (Wen): https://amzn.to/2XxE3iu

Видео Build this Revolutionary Cross Cut Sled, for Newbies! канала The Newbie Woodworker