Dynamic cone penetration (DCP) Test
The Dynamic Cone Penetrometer (DCP) is used to determine underlying soil strength by measuring the penetration of the device into the soil after each hammer blow.Conducting a DCP test involves raising and dropping the hammer to drive the cone on the lower shaft through the underlying pavement layers. This test is used to calculate the in-situ CBR value of the soil at specific locations.
Видео Dynamic cone penetration (DCP) Test канала The Civil Engineer
Видео Dynamic cone penetration (DCP) Test канала The Civil Engineer
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Rwanda Polytechnic - Road Construction Level 5 - Performing a Dynamic Cone Penetration Test - 1 of 2
DCP Soil Testing - Monticello IA
Direct shear test - Geotechnical Engineering Lab
Dynamic Cone Penetration Test | K-100 Model | Kessler DCP | Soil Investigation
Memocone - Maintenance and preparation before CPT (Cone Penetration Test)
Lecture 4: Borehole logs, SPT tests, SPT Data Analysis, Drawing Cross-Sections, Common Mistakes
Soil Testing Equipment Pneumatic Dynamic Cone Penetrometer DCP
DCP Test
Bearing capacity test.
Practical demonstration - Students performing a DCP Test after trench compaction.
DCP - Dynamic Cone Penetrometer Test, Lengkap Data Lapangan dan Perhitungan Excel - DCP Vs CBR !
Operation of the Dynamic Cone Penetrometer
Asphalt wearing course laying process
Cone Penetration Test-2001
STANDARD PENETRATION TEST OF SOIL
Rwanda Polytechnic - Road Construction Level 5 - Performing a Dynamic Cone Penetration Test - 2 of 2
Soil Lab - Hydrometer Test 4CED Group 2
Dynamic Cone Penetration Test Analysis
Vertical Pile load test by Static Method
Pavement Design (Lec 18) - Dynamic Cone Penetrometer (DCP) of soils and aggregate