TireJect Tire Bead Sealant

A look at the TireJect beat sealant, and almost three week review. This is a cost effective option to repair a leaky tire bead. Before using you should verify with soapy water and a visual inspection that there are no other holes in the tire. In order to ensure proper tire balance, it is important to drive the vehicle for about 20+ minutes. After installation, it appears that there was a small loss in air (~5psi) over the first couple of days that stabilized. Over the duration of the 19 days shown in the video my tire would have otherwise required it to be inflated three to four times. I have topped off the tire after shooting the video, and it is holding pressure as it should. Overall this seems to work (so far). It runs about $22 for one standard tire or $28 for two tires /one large truck tire.

TireJect Bead Sealant (affiliate links that support this channel)
Singe pack: https://amzn.to/37pyZNO
Two pack: https://amzn.to/2G9etFp
Off-Road: https://amzn.to/2tsUEq1

Other Tools:
Astro Pneumatic Inflator: https://amzn.to/2RzvDBn

Видео TireJect Tire Bead Sealant канала On The Workbench