The TKO - 4 round, short dart, inline clip, Nerf Rival Knockout
CORRECTION: The muzzle piece does not just fit onto a stock Knockout. the orange piece of plastic beneath the barrel on the Knockout gets in the way. My bad there!
Here's a brief overview of my 4 round inline clip Knockout, which I'm calling a "TKO". I am using the stock Knockout spring and in this 4 shot configuration I am getting an average of 125fps.
Materials used in my build:
one 8 1/2 inch length of polycarbonate tubing (5/8" ID, 3/4" OD, 1/16" Wall)
one 3 1/8 inch length of polycarbonate tubing (1/2" ID x 5/8" OD x 1/16" Wall)
one M3 brass insert
one M3x30mm socket head bolt
two 014 o-rings, 70A Durometer (1/2" ID, 5/8" OD, 1/16" Width)
Thingiverse link for 3D printed parts:
https://www.thingiverse.com/thing:4348384
Видео The TKO - 4 round, short dart, inline clip, Nerf Rival Knockout канала ehdrien
Here's a brief overview of my 4 round inline clip Knockout, which I'm calling a "TKO". I am using the stock Knockout spring and in this 4 shot configuration I am getting an average of 125fps.
Materials used in my build:
one 8 1/2 inch length of polycarbonate tubing (5/8" ID, 3/4" OD, 1/16" Wall)
one 3 1/8 inch length of polycarbonate tubing (1/2" ID x 5/8" OD x 1/16" Wall)
one M3 brass insert
one M3x30mm socket head bolt
two 014 o-rings, 70A Durometer (1/2" ID, 5/8" OD, 1/16" Width)
Thingiverse link for 3D printed parts:
https://www.thingiverse.com/thing:4348384
Видео The TKO - 4 round, short dart, inline clip, Nerf Rival Knockout канала ehdrien
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![TKO build guide Part 1 - Disassembly and barrel modification](https://i.ytimg.com/vi/eTT2uNbOjAc/default.jpg)
![Knockout Pistol Mod Overview and Test 180FPS+](https://i.ytimg.com/vi/z1jVNVZ5TbU/default.jpg)
![Why this $10 Nerf Blaster is Surprisingly Good](https://i.ytimg.com/vi/5UI6-vAMNfo/default.jpg)
![Complete MOD Guide - Nerf Rival Knockout xx-100](https://i.ytimg.com/vi/Oy2m8-ip22g/default.jpg)
![Nerf Rival Knockout Brass Breach Kit from Frantz Foam Works](https://i.ytimg.com/vi/a3Zg6DgGsj8/default.jpg)
![Nerf Mods: Leveling Up The Nerf Rival Knockout](https://i.ytimg.com/vi/EvTbt5cEEQo/default.jpg)
![Showdown! Nerf Rival Fate VS Nerf Rival Knockout - to the death! (Not really)](https://i.ytimg.com/vi/AhYDFwkSb2g/default.jpg)
![NERF Mk 22 "Hush Puppy" RIVAL Knockout Mod Tutorial | Walcom S7](https://i.ytimg.com/vi/qm1CpncfIyA/default.jpg)
![TKO build guide part 3 - Inline Clip - Re-uploaded](https://i.ytimg.com/vi/pYkCkW8plj4/default.jpg)
![3D Printed Force-Of-Nature V2](https://i.ytimg.com/vi/TEmKRoF-ST4/default.jpg)
![[REVIEW] Nerf Rival Pathfinder, Vision, & Fate | Group Review](https://i.ytimg.com/vi/5x6ALxI97-E/default.jpg)
![Make your NERF RIVAL KRONOS Half-dart Magazine fed! | Walcom S7](https://i.ytimg.com/vi/6tYItZ_Azoc/default.jpg)
![TKO build guide part 5 - re-assembly](https://i.ytimg.com/vi/kVPL0qk8484/default.jpg)
![Nerf Double Barrel ShotGun handling](https://i.ytimg.com/vi/6z8S14Cpg-o/default.jpg)
![Honest Review: The Chaos Meteor From Zuru](https://i.ytimg.com/vi/C8hKWyS2wlU/default.jpg)
![Commission - Half Dart Stampede](https://i.ytimg.com/vi/df_3YDIzS_k/default.jpg)
![Spring Thunder custom parts overview](https://i.ytimg.com/vi/gof2dwwcUkk/default.jpg)
![Monday Mod Tips - Knockout - Reassembly Guide](https://i.ytimg.com/vi/_EEzHiicXys/default.jpg)
![nerf Knockout mod complete Guide-Detailed tutorial[mod]](https://i.ytimg.com/vi/nMssUluxs44/default.jpg)
![[NERF] Adventure Force Alpha Rogue Action Blaster](https://i.ytimg.com/vi/GZSGAE7No64/default.jpg)