Tektronix 2465B DM Special Addition NIST Certification of Calibration.

Ever wonder why your system performs unsatisfactorily even though they had some test equipment? Hopefully it's obvious by now. Those that know it show it, those that don't won't. Cleaner and meaner, not noise or toys. Subscribe, click notifications bell and Stay Tuned In. Read on ..

Scope watts or nope watts, take your pick. Tired of misleading BS yet? If they don't show you or do so in a deceiving way, you've been mislead. Learn to identify "Golden Screwdriver Jockeys and Scammers". *Note: There'll always be drama regarding my disgruntled competitors and their followers, they're just doing their best. When "Ready", pm me on Facebook including phone number. Contact information below, don't be in a hurry!

"Radios not only transform signals into waves, they transform waves into sound"

Ringy, tinny, muffled, meter swinging low range hacked up over-modulated splatter box radios with a noisy receiver and miscalibrated "S" Meter (for starters) have been peaked & tuned, comp-tuned or "so-called" Hi-Fi" mods performed and misaligned by a Golden Screwdriver magician. Yes, magician not technician.

Internet truck stop competition tune and alignments are useless in the Real World. Not only do they produce a noisy receiver, they'll bleed your wallet and all over neighbors too! Years ago, while still accepting walk-ins, this was about 90% of all radio related issues and complaints from customers nationwide .. and still are!

****How to recognize****
They'll ask you to "look at the meter" or other salvation army test equipment stacked up the wall and claim that a pure waveform on a NIST "O"scope is not necessary. RUN!!

They'll poise their meter farm at you while making strange vocal sounds, whistling or injecting an unknown tone into the mic socket trying to convince you that all of that "distortion" is considered rms, average or bird watts. (LOL)

Most don't have a clue what each unit of measurement represents, how to derive it or have an accurate way of testing but they sure do put on a show! This might look impressive to some but in reality, these tunes produce "far less usable power". Sound familiar? Many have fallen for these "tricks" so don't feel bad.

"Software Jockeys" don't show anything useful at all .. because they cant! They just copy and paste or talk a lot trying to baffle you with their BS while hiding behind a pseudonym (Extra channels, channel kits, stinger boards etc).

***Achieving Real World Performance***
Do your due diligence! Demand the testing and tuning of your equipment on a minimum 100 MHz **Analog** Oscilloscope, Bird 4314c meter or equivalent and a 1 GHz spectrum analyzer / Service Monitor with a NIST (https://www.nist.gov/) Traceable "Certification of Calibration". It's the only accurate way of measuring spurious emissions, harmonics and true power @ the fundamental frequency replicating "Real World Performance".

All test equipment and gear under test including meter, scope, spectrum analyzer, sampler, radio and amp if applicable must be in plain sight at all times while gear is under test, fully modulated. Inducing distortion though meter using un-calibrated "flea market" test equipment is misrepresentation and an illusion playing on your ignorance while insulting your intelligence!

If they cant display everything all at the same time while under test, explain ac volts, pep, pk, cw, rms (Ohms Law), capacitance, inductance and the basic principles of a phase shift then how do you expect them to accurately test, tune or align your system? Ever wonder why they cant come up with anything original, attempt to replicate or imitate everything that I do and yet fail miserably in a deceiving way?

Fine Tune CB adheres to NIST and other standards to maintain accuracy and consistency for providing "Real World Performance" with integrity.
https://www.nist.gov/

The Bench:

HP8924c Service Monitor with options:
https://www.youtube.com/watch?v=Cg1w0xBa27s

TEKTRONIX 2465B+DMM 400MHz "Analog" OSCILLOSCOPE
https://www.youtube.com/watch?v=by98x4eu2lM

(A comprehensive list below in the comments section including dBm to watts and volts tables)

More range and reliability with peace of mind, get Fine Tuned, not peaked and ruined.

Don't let them play Three Card Monte with you because they will. Most importantly, find someone who's honest and competent, not part of Facebook CB related groups, a pseudonym on a forum, has a Service Monitor with a NIST Traceable Certification of Calibration and not garage sale non certified test equipment stacked up the wall trying to baffle you with BS. Never settle for less because that's what you'll get, Houdini tricks, ghost watts, "S9" out of calibration and a noisy receiver!

Sorry, not accepting walk-ins or shipping internationally.

Practicing what I preach videogates: https://www.youtube.com/results?search_query=hard+drive+163

Contact: https://www.youtube.com/watch?v=P0W_Ltzeyyc

Hard Drive 163 NM 73's ClickClick

Видео Tektronix 2465B DM Special Addition NIST Certification of Calibration. канала Fine Tune CB Shop