Atkins Solid Corner Seals vs Mazda Two Piece Corner Seals
I took the street port engine apart again and swapped the Atkins solid corner seals for OEM Mazda two piece corner seals. Compression saw a big improvement but I'm still not happy with the results. I will keep working on the engine and building it until I am satisfied.
Видео Atkins Solid Corner Seals vs Mazda Two Piece Corner Seals канала Howzer Tech
Видео Atkins Solid Corner Seals vs Mazda Two Piece Corner Seals канала Howzer Tech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Why semi p ports are better then bridge ports](https://i.ytimg.com/vi/B_2FQVbc52k/default.jpg)
![Evolution of the Apex Seal](https://i.ytimg.com/vi/c9K6aQJ_Wls/default.jpg)
![Clearancing 13B-REW Rotary Side Seals Using A Drill Press](https://i.ytimg.com/vi/9w2kjxMkESU/default.jpg)
![Taking Apart the Low Compresison Engine](https://i.ytimg.com/vi/3EXYfGYb6DU/default.jpg)
![CRANKSHAFT TRUING MADE EASY | How To True Two Stroke Crank | 2 STROKE TUNING](https://i.ytimg.com/vi/6lKLKtzWPQI/default.jpg)
![Engine Assembly Starts NOW!!](https://i.ytimg.com/vi/28t_5GfIu2Y/default.jpg)
![CNC Porting by Rotaryengine.com](https://i.ytimg.com/vi/8ahtinSj7yA/default.jpg)
![Hybrid Renesis Rotary Engine Explained, what it needs, Mazda RX8 Kyle Mohan Racing, Mazdatrix](https://i.ytimg.com/vi/cnNt_meR12Q/default.jpg)
![Rotary Side Seal Sizing](https://i.ytimg.com/vi/PGGK93GErlE/default.jpg)
![RX-8 Block REBUILD! Engine series part 2](https://i.ytimg.com/vi/-xUyMjuJ5XM/default.jpg)
![Here's What A Damaged Rotary Engine Looks Like Inside](https://i.ytimg.com/vi/J80JjWoiU9c/default.jpg)
![Unbreakable rotary engine apex seals explained | fullBOOST](https://i.ytimg.com/vi/CG0jILXWKmU/default.jpg)
![How to Port a Rotary Engine For More Power](https://i.ytimg.com/vi/UXXy2XlptMY/default.jpg)
![How To Tell If Your Apex Seals Are Blown In Your Rotary Engine](https://i.ytimg.com/vi/qp86GFQ3mA4/default.jpg)
![Why you need a BILLET Rotary engine | fullBOOST](https://i.ytimg.com/vi/sOWx4PtMV9w/default.jpg)
![1993 Turbo FD RX7 Cold Start AFTER 6 YEARS! BRAPPP RX-7 Rotary Revival!](https://i.ytimg.com/vi/E1yCkEdeBxg/default.jpg)
![Machining Explained On Alberto "Big Boost" Engine Build](https://i.ytimg.com/vi/X490rOAI1jo/default.jpg)
![THE BASICS OF CUTTING AND CLEARANCING RENESIS 13B SIDE SEALS](https://i.ytimg.com/vi/AWfVFaJpuYc/default.jpg)
![RX7 Bridgeport Engine Build Pt.3 - Porting Housings and Finishing Intake Ports](https://i.ytimg.com/vi/g7g8POkiGkk/default.jpg)
![Rx8 How-To Trans Removal! Service Clutch/Trans/throw out bearing and more](https://i.ytimg.com/vi/bSmJvnVTeJs/default.jpg)