Fixing Cross Slide Backlash on my South Bend 11
Making a new nut for my cross slide to address the excessive backlash. I'll also address the problem with a screw that obstructs the compound angle while cutting internal threads. My South Bend is a 1931 model and I'll be updating the cross slide nut and screw to make it more like newer South Bend lathes.
Видео Fixing Cross Slide Backlash on my South Bend 11 канала Winky's Workshop
Видео Fixing Cross Slide Backlash on my South Bend 11 канала Winky's Workshop
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making a Lathe Crossfeed Nut - My way](https://i.ytimg.com/vi/SuVqIbXDuNo/default.jpg)
![BACKLASH - Machining basics on the metal lathe and mill](https://i.ytimg.com/vi/NqF_ETWvBCA/default.jpg)
![New Dials for my 1931 South Bend 11-inch lathe #84-A](https://i.ytimg.com/vi/3DQ2vcOPec4/default.jpg)
![Rare Antique Fractal Vise [Restoration]](https://i.ytimg.com/vi/QBeOgGt_oWU/default.jpg)
![Best Ever Guided Tap Wrench!](https://i.ytimg.com/vi/sC9lWrQeNX0/default.jpg)
![How to Fix Backlash on Lathe Cross-Feed (Y Axis) - Adjusting Backlash on a Smithy Machine.](https://i.ytimg.com/vi/zoV9dpD8Seo/default.jpg)
![Machining a New Bronze Cross Feed Nut for a 1909 F. E. Reed Lathe](https://i.ytimg.com/vi/5xxoREftKwk/default.jpg)
![The Ultimate Round Column Mill Fix](https://i.ytimg.com/vi/_2JXRt3_4qw/default.jpg)
![Southbend apron and saddle rebuild 9A](https://i.ytimg.com/vi/2PQknXd209k/default.jpg)
![](https://i.ytimg.com/vi/l_BKZwXtiYw/default.jpg)
![Would Crosslide Nut Replacement Fix Lathe Backlash - How To Fix Lathe Backlash](https://i.ytimg.com/vi/mg39lSYUq70/default.jpg)
![Lathe Cross Feed Screw: Cutting Left Hand Modified Square Threads](https://i.ytimg.com/vi/xrc_tuS2m8A/default.jpg)
![Making a Threading Dial for my 1931 South Bend 11 #84-A](https://i.ytimg.com/vi/-BIX0cJw5Ls/default.jpg)
![Making a Compound Screw For The South Bend Lathe](https://i.ytimg.com/vi/df-7pQ3MA6k/default.jpg)
![Simple Indexing on a Metal Lathe](https://i.ytimg.com/vi/xauJcjrINy0/default.jpg)
![Grooving and Boring and Turning, Oh My! Monarch Lathe Action](https://i.ytimg.com/vi/JXoC288grHQ/default.jpg)
![Cross-slide & Compound 1](https://i.ytimg.com/vi/qt5cAf1ZcDA/default.jpg)
![Tips #328 Cleaning the Apron on SOUTH BEND 9 inch Lathe tubalcain](https://i.ytimg.com/vi/Oz9pZfGE-U0/default.jpg)
![The DRILL PRESS FIX - A Square Column for your drill press - Part 1](https://i.ytimg.com/vi/i4_FtMMMfDw/default.jpg)
![4" x 6" Horizontal Bandsaw - Fixing the depth of cut issue](https://i.ytimg.com/vi/-GiKBm4gecw/default.jpg)