8 Pro Tips for Improving your Mastercam Workflow
I said this might turn into a series...here we are with video 2 of the quick tips, 8 tips this time. (how many are needed to be considered a series? doesn't seem like 2 is a series? guess we'll need at least a third, maybe a forth.)
Taking some inspiration from Spinal Tap this go round, if 11 is louder (better) than 10, that must mean a tip video with 8 tips is better than a tips video with 7 tips!
The 8 tips in this video, first we look at the Sliding Section View for getting a peek at those tough to see nooks and crannies in your parts. Second, how moving a toolpath in your solid tree can help to avoid some features which may produce some unwanted movement. Next, how we can easily deal with converting inch and metric values when in one of the other system units. Then we look at stepping through our backplot with other options than simply clicking the left mouse button repeatedly. Keeping with the middle mouse wheel, the fifth tip is using your mouse scroll wheel to interact with pulldown menu options. A very quick tip for tip #6 but one that is super useful for those coming from an X version of Mastercam, the Command Finder. Tip 7 looks at how you can add comments to your toolpaths and stock models without having to enter into their Parameters. And the final tip, Hide and Un-Hide.
I guess if this is to officially turn into a series of videos, I need to make at least one more! I think I can find a few more, let's hope I can keep the Spinal Tap thinking up and make the next video 9 quick tips!
0:00 Intro
0:30 Sliding Section View
1:01 Toolpaths in the Solid Tree
1:52 Converting Metric and Inch
3:25 S + B for Backplot
4:19 Mouse Wheel for Pulldowns
5:11 Command Finder
5:36 Adding Comments
6:37 Hide and UnHide
See other blog posts
https://blog.caminstructor.com
Check out our website
https://caminstructor.com
#Mastercam #LearnCNC
Видео 8 Pro Tips for Improving your Mastercam Workflow канала CamInstructor
Taking some inspiration from Spinal Tap this go round, if 11 is louder (better) than 10, that must mean a tip video with 8 tips is better than a tips video with 7 tips!
The 8 tips in this video, first we look at the Sliding Section View for getting a peek at those tough to see nooks and crannies in your parts. Second, how moving a toolpath in your solid tree can help to avoid some features which may produce some unwanted movement. Next, how we can easily deal with converting inch and metric values when in one of the other system units. Then we look at stepping through our backplot with other options than simply clicking the left mouse button repeatedly. Keeping with the middle mouse wheel, the fifth tip is using your mouse scroll wheel to interact with pulldown menu options. A very quick tip for tip #6 but one that is super useful for those coming from an X version of Mastercam, the Command Finder. Tip 7 looks at how you can add comments to your toolpaths and stock models without having to enter into their Parameters. And the final tip, Hide and Un-Hide.
I guess if this is to officially turn into a series of videos, I need to make at least one more! I think I can find a few more, let's hope I can keep the Spinal Tap thinking up and make the next video 9 quick tips!
0:00 Intro
0:30 Sliding Section View
1:01 Toolpaths in the Solid Tree
1:52 Converting Metric and Inch
3:25 S + B for Backplot
4:19 Mouse Wheel for Pulldowns
5:11 Command Finder
5:36 Adding Comments
6:37 Hide and UnHide
See other blog posts
https://blog.caminstructor.com
Check out our website
https://caminstructor.com
#Mastercam #LearnCNC
Видео 8 Pro Tips for Improving your Mastercam Workflow канала CamInstructor
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Mastercam Linking Parameters 3 - Feed Plane](https://i.ytimg.com/vi/Od1XuecTHW8/default.jpg)
![FREE Mastercam, SolidWorks, CNC Programming, and Setup Lessons!!](https://i.ytimg.com/vi/z6N6tJ3E7MA/default.jpg)
![Solid Import and Alignment | Xometry CNC Mill Test Part - Video 2](https://i.ytimg.com/vi/0jPl2fxln5A/default.jpg)
![Mastercam Linking Parameters 2 - Retract](https://i.ytimg.com/vi/lJqElEv5b5w/default.jpg)
![Put away those sunglasses - Enable Mastercams Dark Mode!](https://i.ytimg.com/vi/1FoL6zSXOYU/default.jpg)
![New in Mastercam 2019 - De-burring - Video 1](https://i.ytimg.com/vi/5-h5v883wiI/default.jpg)
![Learn Mastercam with camInstructor](https://i.ytimg.com/vi/btR-j9hb2ws/default.jpg)
![A Little Mastercam Tip and The camInstructor BIG Event](https://i.ytimg.com/vi/VYXgkev4w0c/default.jpg)
![Mastercam Divide And The New Functionality For 2019](https://i.ytimg.com/vi/RG7OJk7yHPM/default.jpg)
![Tools for Online Teaching and Learning](https://i.ytimg.com/vi/oywN5SkjfCE/default.jpg)
![It's Time to Update to Mastercam 2023!](https://i.ytimg.com/vi/ELDKcdsUaJI/default.jpg)
![Dave The Intern Learns Mastercam | Part 4](https://i.ytimg.com/vi/9u_T3brc7bc/default.jpg)
![Mastercam Dynamic Milling - Every Parameter Part 5 of 5](https://i.ytimg.com/vi/fKfEoLWYLSU/default.jpg)
![How much RAM does Mastercam really need?](https://i.ytimg.com/vi/STwIH2R5T4E/default.jpg)
![Learn SOLIDWORKS with camInstructor](https://i.ytimg.com/vi/fWhYqsHAiCs/default.jpg)
![Command Finder - MQT #shorts](https://i.ytimg.com/vi/OESNAdSwRC4/default.jpg)
![Mastercam OptiRough Toolpath Video 3](https://i.ytimg.com/vi/15boGZ4puHU/default.jpg)
![#Mastercam Move a Toolpath in the Solid Tree to Avoid a Feature](https://i.ytimg.com/vi/Iq1atGwuKVo/default.jpg)
![Mastercam Linking Parameters 5 - Output Feed, Arc Fit](https://i.ytimg.com/vi/Dtpr7nQ130o/default.jpg)
![New in Mastercam 2019 - Advanced Display](https://i.ytimg.com/vi/A5r2bn2OIqA/default.jpg)
![Using the Mouse Wheel for Pull Down Selection in #Mastercam](https://i.ytimg.com/vi/3HNkzGIQDtM/default.jpg)