All Mode Test – Have to Find the Weak Points
With the constant current mode working pretty well. I take a stab at the other 3 modes. Constant voltage has a surprise for me. Though if I would have thought about it more, it should have been obvious. And constant resistance is causing the difficulties that I kinda was expecting. Also, I try to get a bit more use from the hardware ADC filters.
Part 28 of the DCL1 electronic load project
Видео All Mode Test – Have to Find the Weak Points канала Metal Plastic Electronics
Part 28 of the DCL1 electronic load project
Видео All Mode Test – Have to Find the Weak Points канала Metal Plastic Electronics
Показать
Комментарии отсутствуют
Информация о видео
29 июня 2023 г. 20:50:40
00:09:27
Другие видео канала
Cheap Scope Probe To Solder-In Scope ProbeBattery Tab Spot-weld Testing 0.1 mm NickelGetting Started with the tinyAVR 0-Series TimersOIVO DualSense Charging Cradle Zener ModFirst Power Test – Letting the Magic Smoke Out (CD Welder Project Part 6)Power Supply Version 2.0 – To The RescueAmzcnc CC60 Review – A Knockout Punch That’s Not Quite Staggering5 Color Banana Plug Kit – The Good & BadRepairing a Canon imagePROGRAF PRO-6100 with Nightmare ProblemsA Lot of Hot: American Beauty 3138X-175 ReviewMaking a Special T-8 LED Lamp FixtureDCL1 Starts to Take Shape – Layout and Mounting of ComponentsThe MOSFET Connection3 Banana Plug ReviewAcrylic Utility Blade Disposal/Storage BoxMotorized Batter Tab Weld Head Project (Part1- Intro)Multi-Output Isolated DC-DC Supply Build – MAX17691A Initial TestI Make a Knob – First Time KnurlingNow Where Did I Put That Ground2 Watt Resistor Quest