How to Replace Drive Belt Tensioner 2005-2015 Toyota Tacoma 2.7L I4

Buy Now!
New Accessory Drive Belt Tensioner from 1AAuto.com http://1aau.to/ia/1AEBT00118

This video shows you how to install a new drive belt tensioner from TRQ on your 2005-2015 Toyota Tacoma (2.7L L4).

Estimated installation time for a professional technician is approximately: 24 minutes

This repair was done on a 2010 Toyota Tacoma Base 2.7L Standard Cab Pickup 2-Door 4WD Manual and the process should be similar on the following vehicles:
2005 Toyota Tacoma
2006 Toyota Tacoma
2007 Toyota Tacoma
2008 Toyota Tacoma
2009 Toyota Tacoma
2010 Toyota Tacoma
2011 Toyota Tacoma
2012 Toyota Tacoma
2013 Toyota Tacoma
2014 Toyota Tacoma
2015 Toyota Tacoma

Tools you will need:
• Pry Bar http://1aau.to/oabT/1AXAA00020
• 14mm Wrench http://1aau.to/oagI/1AXAA00010
• 12mm Socket http://1aau.to/ocfP/1AXAA00015
• 14mm Socket http://1aau.to/ocfP/1AXAA00015
• Trim Tool Set http://1aau.to/oaCb/1AXXX00006
• Ratchet http://1aau.to/ocgE/1AXAA00016
• Torque Wrench http://1aau.to/objd/1AXAA00044
• Gloves http://1aau.to/objZ/1AXSS00048
• Safety Glasses
• Hammer

Subscribe: https://www.youtube.com/channel/UCWCdsftsTqYMO7cA_5Sc-yA?sub_confirmation=1

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Видео How to Replace Drive Belt Tensioner 2005-2015 Toyota Tacoma 2.7L I4 канала TRQ