Neje Master 2S Plus 80w/15w Engrave & Cut 3mm Ply

I was curious to see if a cheap diode laser would cut 3mm ply wood in one pass, After research I found the Neje Master 2S Plus with A40640 80w Module and 255mm x 420mm work area. I purchase the laser and it came pretty quickly. unboxing and setup took about 5min which is awesome.

Results: AWESOME!!!! it cuts 3mm with ease and I was able to even cut 5-6mm in one pass

I purchased the laser from Neje Store on AliExpress
https://www.aliexpress.com/item/1005001605931377.html?spm=a2g0o.9042311.0.0.5acd4c4dAG3nIv

3d Printed my Air Assist nozzle from Thingiverse - I used my Anycubic Photon Mono SE with mix of Anycubic Eco resin and Siryatech Tenacious to give a little flex
https://www.thingiverse.com/thing:5150417

I used 5mm clear tube to connect the Air Assit to the Aquarium pump 70ltr/min
#laser #laser engraving #laser Cutter #diode #neje #etching #wood

Видео Neje Master 2S Plus 80w/15w Engrave & Cut 3mm Ply канала Unstable Reality