3-steps to Whole-House EMP Protection

Describes how to protect your home against an EMP. Our recommended approach is to: 1) install a high-current surge protection device, 2) install High-saturation EMP Ferrites in breaker panel, 3) install small broadband ferrites on power cords of sensitive electronics. Note that very sensitive items that are not plugged in can also be stored in EMP bags.

See https://disasterpreparer.com for ferrites and EMP bags. The surge protection device that we recommend is the Siemens FS140, available at Amazon for under $200.

The content of this video was posted previously as part of a longer video. Folks asked that I post a shorter version only discussing the preparations.

Disclaimer: Our videos have been made available for informational, entertainment, and educational purposes only. Content should NOT be considered professional advice, engineering or otherwise. Neither Disasterpreparer LLC nor its member, Dr. Arthur Bradley, make any representation with respect to accuracy, applicability, or completeness of the content. Further, our videos are NOT intended to be a substitute for professional advice from an engineer, electrician, or any other professional. Disasterpreparer LLC and its member, Dr. Arthur Bradley, disclaim any and all liability to any party for any direct, indirect, implied, punitive, special, incidental, or other consequential damages arising directly or indirect, implied, punitive, special, incidental, or other consequential damages arising directly or indirectly from any use of video content, which is provided as is, and without warranties.

Видео 3-steps to Whole-House EMP Protection канала disasterprepper