AC Servo Motors and FogBuster Mist Coolant (DIY CNC Mill Upgrades 1)
BOM and Wiring Guide: https://geni.us/CNC-Mill
DIY CNC Mill Upgrade 2: https://youtu.be/6KaNF0IshBI
CNC Mill Conversion Video: https://youtu.be/qDr81TccvMY
Dr. D-Flo's Instagram: https://www.instagram.com/dr.dflo/
DMM Servo Motors, Drives, and Cables:
DMM Servo Drive: https://geni.us/DMM-Drive
DMM X & Y Motors: https://geni.us/DMM-86N-DHT
DMM Z Motor w/ Brake: https://geni.us/DMM-A15-DHT
Power Cable for X & Y: https://geni.us/Power-Cable1
Encoder Cable for X & Y: https://geni.us/Encoder-Cable1
Power Cable for Z: https://geni.us/Power-Cable2
Encoder Cable for Z: https://geni.us/Encoder-Cable2
Tuning Cable: https://geni.us/Tuning
MQL System and Coolant:
FogBuster Mini: https://geni.us/FogBuster
DuraKut DK7000B (Paid Link): https://geni.us/DuraKut7000B
Misc. Products:
Servomotor Disc Coupler: https://geni.us/Disc-Coupler
Kurt CNC Vise (Paid Link): https://geni.us/Kurt-DX6
Kurt Magnetic Jaw and Parallel Set (Paid Link): https://geni.us/Magnetic-Jaws
Video Description:
It is time to take Dr. D-Flo’s barebones CNC mill and upgrade it with components that will improve its throughput, repeatability, and cut quality. The goal is to have a capable machine for eventually producing products to sell. This is the first video in this upgrade series and is focused on improving the linear motion of the mill. To eliminate resonance (i.e. vibration) and other movement anomalies, Dr. D-Flo is swapping out the open-loop stepper motors for DMM AC Servo motors. Dr. D-Flo discusses the differences between Servo and Stepper motors and how servo motors are “position-aware” through closed-loop encoder feedback. Dr. D-Flo walks through the process of tuning a servo motor, which is much easier than people on the forums make it out to be.
In addition to installing the servo motors, Dr. D-Flo also adds the Mini FogBuster Mist coolant system. The FogBuster is a Minimum Quantity Lubrication (MQL) device that works perfectly for open-air mill setups because it dispenses just enough coolant to keep the endmill cool, which minimizes the mess associated with coolant/lubricant. Further, the FogBuster uses a patented technology to prevent the generation of aerosols (known as atomizing), so when you are in a small and enclosed space like Dr. D-Flo’s garage the amount of coolant you will inhale will be kept to a minimum.
These upgrades combine to create some awesome parts, so if you enjoy watching a CNC mill at work then stick around until the end! Get subscribed because there will be more awesome upgrades to come.
Table of Contents:
00:00 - Introduction
04:12 - Servo vs Stepper Motors
07:38 - Installing Servo Motors
16:04 - Tuning Servo Motors
24:05 - MQL Systems
24:43 - Compressed Air Setup
26:14 - Relay & Flyback Diode
28:01 - Installing FogBuster
31:17 - Atomizing
32:09 - Test Cut
38:39 - Faster Rapids
Disclosure:
Dr. D-Flo was not paid to make this video, but he did receive the products at a reduced rate or free of charge, which is why this video is marked to include paid promotion.
#Servos #Coolant #Mill
Видео AC Servo Motors and FogBuster Mist Coolant (DIY CNC Mill Upgrades 1) канала Dr. D-Flo
DIY CNC Mill Upgrade 2: https://youtu.be/6KaNF0IshBI
CNC Mill Conversion Video: https://youtu.be/qDr81TccvMY
Dr. D-Flo's Instagram: https://www.instagram.com/dr.dflo/
DMM Servo Motors, Drives, and Cables:
DMM Servo Drive: https://geni.us/DMM-Drive
DMM X & Y Motors: https://geni.us/DMM-86N-DHT
DMM Z Motor w/ Brake: https://geni.us/DMM-A15-DHT
Power Cable for X & Y: https://geni.us/Power-Cable1
Encoder Cable for X & Y: https://geni.us/Encoder-Cable1
Power Cable for Z: https://geni.us/Power-Cable2
Encoder Cable for Z: https://geni.us/Encoder-Cable2
Tuning Cable: https://geni.us/Tuning
MQL System and Coolant:
FogBuster Mini: https://geni.us/FogBuster
DuraKut DK7000B (Paid Link): https://geni.us/DuraKut7000B
Misc. Products:
Servomotor Disc Coupler: https://geni.us/Disc-Coupler
Kurt CNC Vise (Paid Link): https://geni.us/Kurt-DX6
Kurt Magnetic Jaw and Parallel Set (Paid Link): https://geni.us/Magnetic-Jaws
Video Description:
It is time to take Dr. D-Flo’s barebones CNC mill and upgrade it with components that will improve its throughput, repeatability, and cut quality. The goal is to have a capable machine for eventually producing products to sell. This is the first video in this upgrade series and is focused on improving the linear motion of the mill. To eliminate resonance (i.e. vibration) and other movement anomalies, Dr. D-Flo is swapping out the open-loop stepper motors for DMM AC Servo motors. Dr. D-Flo discusses the differences between Servo and Stepper motors and how servo motors are “position-aware” through closed-loop encoder feedback. Dr. D-Flo walks through the process of tuning a servo motor, which is much easier than people on the forums make it out to be.
In addition to installing the servo motors, Dr. D-Flo also adds the Mini FogBuster Mist coolant system. The FogBuster is a Minimum Quantity Lubrication (MQL) device that works perfectly for open-air mill setups because it dispenses just enough coolant to keep the endmill cool, which minimizes the mess associated with coolant/lubricant. Further, the FogBuster uses a patented technology to prevent the generation of aerosols (known as atomizing), so when you are in a small and enclosed space like Dr. D-Flo’s garage the amount of coolant you will inhale will be kept to a minimum.
These upgrades combine to create some awesome parts, so if you enjoy watching a CNC mill at work then stick around until the end! Get subscribed because there will be more awesome upgrades to come.
Table of Contents:
00:00 - Introduction
04:12 - Servo vs Stepper Motors
07:38 - Installing Servo Motors
16:04 - Tuning Servo Motors
24:05 - MQL Systems
24:43 - Compressed Air Setup
26:14 - Relay & Flyback Diode
28:01 - Installing FogBuster
31:17 - Atomizing
32:09 - Test Cut
38:39 - Faster Rapids
Disclosure:
Dr. D-Flo was not paid to make this video, but he did receive the products at a reduced rate or free of charge, which is why this video is marked to include paid promotion.
#Servos #Coolant #Mill
Видео AC Servo Motors and FogBuster Mist Coolant (DIY CNC Mill Upgrades 1) канала Dr. D-Flo
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Power Drawbar and Tool Offsets (DIY CNC Mill Upgrades 2)Servo Basic ConceptsBuilding a Selective Laser Sintering (SLS) 3D Printer!What is a Servo Motor and How it Works?Chasing Micrometres with the best Ball ScrewsCNC LATHE?! - Router Add-On!How To Setup Chinese AC Servo Motor 80ST-M02430 - Step/Dir Position and Analog Speed Control ModesBuild Your Own CNC Controller, Part 1 | DDCS V3.1 | 6040 RouterOpen Loop and Hybrid Steppers VS DMM DYN2 Servo: Which Is Better?Rigid Tapping with New Motor and VFD (DIY CNC Mill Upgrades 3)Building my own CNC MillLarge cnc mold milling (cnc milling)Adding Limit Switches, Z Probe, Safety Switch And LEDs to IndyMillSainsmart Genmitsu PROVerXL 4030 CNC Router Build, Test & ReviewCNC Finale: Automatic Toolchanger Spindle Install & TestingHomemade DIY CNC - (AUDIO Corrected) ClearPath Servo Motors used on KR33 CNC - Neo7CNC.comHow to Convert a Manual Mill to CNCThe TRUE COST of CNC machining!How to Build a CNC Plasma Cutter