Yet Another Raspberry-pi Laptop (YARL)
In an effort to add to a long line of "Yet Another" products out there, and because nobody asked for it we bring you the "Yet Another Raspberry-pi Laptop (YARL)". This totally fun and easy to setup laptop can do it all from be a standard Raspberry Pi case or an on the go system. Users can print a case with a different screen cover for every day of the week (users make there own past the ones provide). We hope this setup can be used for STEM classes where students can use them with a standard keyboard, mouse and monitor in class and then take them home and continue to use them even if they do not have access to those items later.
Information Page:
https://sites.google.com/view/orthonormal/y-a-r-l
Thingiverse Page:
https://www.thingiverse.com/thing:3194492
All Non-Printed Parts
Quantity Item Price Per Item (approx.)
1 Raspberry Pi 2 or 3 Model B
You will need to have or purchase a rasberry pi 2/3 with power cord and SD card. $50.00
1 KKmoon 59 Keys Ultra Slim Thin Mini Bluetooth Keyboard with Touch Pad Panel
$20.00
1 Standard HDMI & Up Angled HDMI plus 30CM HDTV FPC Cable
$20.00
1 7 inch HDMI Screen LCD Display with Driver Board
$50.00
1 JST PH 2.0MM 4 Pin Female Single Connector with Flat Wires 100MM 1007 26AWG
$1.50
1 Vertical Slide Switch 3 Pin 2 Position 1P2T SPDT Switch 0.5A 50V DC 12mm (optional)
$1.00
33 4MM by 2MM Magnets (used for magentic version)
$5.00
2 Metric M3 12MM Bolts $0.50
5 Metric M3 8MM Bolts $0.06
5 Metric M3 Nuts $0.06
4 Metric M2 4mm Stainless Steel Phillips Round Head Self Tapping Screws $0.50
1 Black 6 mm Dia. Heat Shrink Tubing (60MM length) $0.50
1 Black 13 mm Dia Heat Shrink Tubing (100mm length) $1.00
2 Male-Male breadboard wires with 200mm length (different colors would be great) $0.50
2 Male-Female breadboard wires with 200mm length (different colors would be great) $0.50
2 Female-Female breadboard wires with 200mm length (different colors would be great) $0.50
4 Metric M2 8MM Bolts (used for bolt down version)
If you plan to bolt down the keyboard you will need some M2 bolts. You may need a mixture of 8MM and 12MM length depeding on where you drill the holes in the keyboard.
$1.00
4 M2 4MMx3.5MM Threaded Insert Embedment Knurled Thumb Nut (used for bolt down version)
If you plan to bolt down the keyboard you will need some threaded inserts. There are 4x pre-made holes in the model to accomidate these M2 insert nuts.
$1.00
Total Cost of Hardware (approx.): $100.00 - $150.00.
Видео Yet Another Raspberry-pi Laptop (YARL) канала Chris Sullivan
Information Page:
https://sites.google.com/view/orthonormal/y-a-r-l
Thingiverse Page:
https://www.thingiverse.com/thing:3194492
All Non-Printed Parts
Quantity Item Price Per Item (approx.)
1 Raspberry Pi 2 or 3 Model B
You will need to have or purchase a rasberry pi 2/3 with power cord and SD card. $50.00
1 KKmoon 59 Keys Ultra Slim Thin Mini Bluetooth Keyboard with Touch Pad Panel
$20.00
1 Standard HDMI & Up Angled HDMI plus 30CM HDTV FPC Cable
$20.00
1 7 inch HDMI Screen LCD Display with Driver Board
$50.00
1 JST PH 2.0MM 4 Pin Female Single Connector with Flat Wires 100MM 1007 26AWG
$1.50
1 Vertical Slide Switch 3 Pin 2 Position 1P2T SPDT Switch 0.5A 50V DC 12mm (optional)
$1.00
33 4MM by 2MM Magnets (used for magentic version)
$5.00
2 Metric M3 12MM Bolts $0.50
5 Metric M3 8MM Bolts $0.06
5 Metric M3 Nuts $0.06
4 Metric M2 4mm Stainless Steel Phillips Round Head Self Tapping Screws $0.50
1 Black 6 mm Dia. Heat Shrink Tubing (60MM length) $0.50
1 Black 13 mm Dia Heat Shrink Tubing (100mm length) $1.00
2 Male-Male breadboard wires with 200mm length (different colors would be great) $0.50
2 Male-Female breadboard wires with 200mm length (different colors would be great) $0.50
2 Female-Female breadboard wires with 200mm length (different colors would be great) $0.50
4 Metric M2 8MM Bolts (used for bolt down version)
If you plan to bolt down the keyboard you will need some M2 bolts. You may need a mixture of 8MM and 12MM length depeding on where you drill the holes in the keyboard.
$1.00
4 M2 4MMx3.5MM Threaded Insert Embedment Knurled Thumb Nut (used for bolt down version)
If you plan to bolt down the keyboard you will need some threaded inserts. There are 4x pre-made holes in the model to accomidate these M2 insert nuts.
$1.00
Total Cost of Hardware (approx.): $100.00 - $150.00.
Видео Yet Another Raspberry-pi Laptop (YARL) канала Chris Sullivan
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DIY Raspberry Pi + Arduino LaptopHow to Make a Mini LaptopTurn Your Pi 400 Into A 13.3" Raspberry Pi Laptop With The PiDock 400!A Raspberry Pi 4 Laptop! CrowPi2 First LookHow I Made My Own Tablet Computer - in ChinaHow to Make a LapTab for StudentsEvolution of Laptops (Portable Computers) 1975 - 2020한약통이 있길래 9인치 원목 미니 노트북을 만들어 봤습니다, 일명 조선 노트북 With a herbal medicine box, made an 9-inch wooden laptopAmazing DIY Pocket PCA Raspberry Pi Laptop - The WaveShare PiLaptop - This could have been Amazing but.....How To Make a Mini LapTop at Home With a 3D PrinterRaspberry Pi 400: New All-in-One Pi!DIY Ultra Portable Raspberry Pi LaptopDuB-EnG: Pi-Top 3 or 4 too expensive? Make a DIY Raspberry Pi4 Laptop out of recycled laptop parts!Build a DIY screen out of recycled parts for cheapTrying to build the ultimate Raspberry Pi computer (Zero Terminal V3)Don't Buy a Raspberry Pi Until You've Seen The CrowPi All in One Kit!DIY Raspberry Pi 4 Laptop - First PrototypeHow I Made my own Laptop / DIY LaptopHow to Make DIY Laptop at Home