Xiaomi M365 double air suspension (Monorim V2 + Konyk) first impressions
This was a long-waited one for me! I have installed both suspensions and then it was raining again and again :) But finally, I got a couple of dry days to test them out. And boy did I have a blast!
There are still some things left to do - fix the cracked fender holder, swap the front and the rear shock places to see how it rides. Then extend the brake cable as the stock one is WAY too short now and I am riding with the motor brake only and many small cosmetic things. Also, figure out something with the kick-stand as even the extended one is not enough.
Double air chamber adjustable shock absorber AOY-36RC: https://www.aliexpress.com/item/1005001597973907.html?spm=a2g0s.9042311.0.0.55fc4c4dAurt7f
STL for 3d printing the fender holder:
https://www.thingiverse.com/thing:4151303
My KONYK review: https://www.youtube.com/watch?v=0heMaF1x4FE&t=3s
My previous cheap and terrible front suspension:
https://www.youtube.com/watch?v=XNspKWBxlH8&t=1s
and what's inside it: https://www.youtube.com/watch?v=AtFnbHYDz9Q&t=173s
Drop your questions in the comments and thank you all for watching!
Видео Xiaomi M365 double air suspension (Monorim V2 + Konyk) first impressions канала VRMinde
There are still some things left to do - fix the cracked fender holder, swap the front and the rear shock places to see how it rides. Then extend the brake cable as the stock one is WAY too short now and I am riding with the motor brake only and many small cosmetic things. Also, figure out something with the kick-stand as even the extended one is not enough.
Double air chamber adjustable shock absorber AOY-36RC: https://www.aliexpress.com/item/1005001597973907.html?spm=a2g0s.9042311.0.0.55fc4c4dAurt7f
STL for 3d printing the fender holder:
https://www.thingiverse.com/thing:4151303
My KONYK review: https://www.youtube.com/watch?v=0heMaF1x4FE&t=3s
My previous cheap and terrible front suspension:
https://www.youtube.com/watch?v=XNspKWBxlH8&t=1s
and what's inside it: https://www.youtube.com/watch?v=AtFnbHYDz9Q&t=173s
Drop your questions in the comments and thank you all for watching!
Видео Xiaomi M365 double air suspension (Monorim V2 + Konyk) first impressions канала VRMinde
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
KONYK rear suspension for m365 unboxing and the first look18 MUST HAVE XIAOMI M365 PRO/PRO 2 MODIFICATIONSTutoriel Montage Kit Amortisseur Monorim - Xiaomi M365 / Pro - SuspensionCountersteering + 8 other electric scooter riding tipsInstalo suspensión trasera a patinete Xiaomi m365Xiaomi M365 RITA upgrade, first on-ride impressionsDisassembled my new Xiaomi M365 suspension to give it a second chance?!10inch tires for xiaomi m365 worth it?Kugoo S1 review and comparison to Xiaomi M365Turning on LAUNCH MODE on the P1 Pro Dual-Hub Motor ELECTRIC SCOOTERЗадняя подвеска на Xiaomi m365, Rear suspension. Full suspension m365!Ninbot MAX Suspension (Monorim V2 Intallation Guide)Xiaomi Pro 2 Long Range - 100 minutes / 30km ride in Denmark Copenhagen | Full HDWhy illegal electric scooters are here to stay in the UKXiaomi M365/PRO/1S any voltage hot swappable extra batteryKonyk Rear Suspension Update 2.0 Available for Xiaomi Electric Scooter PROHow did I fit 10 inch tires on Xiaomi M365?Xiaomi M365 Front SuspensionTwo batteries in Xiaomi M365!? 29km range✅ Ponemos Suspension Trasera MONORIM MR-1 | Install MONORIM MR1 Rear Suspension | Xiaomi E-Scooter