Building a Hunting Cabin 3: Installing Wood Trusses
In episode 3 of Building a Hunting Cabin, we wrap up wall framing and start installing wood trusses. Installing the trusses is usually once of my favorite parts of any building. What made this truss install even better was using the JCB telehandler with the truss jib. It was so smooth and responsive to operate and with a 10,000lb capacity, I never had to worry about sticking those trusses all the way out and over the walls. Also, the ability to build an entire truss set on the ground where it was safe, and then to install the truss set has been a goal of mine for a long time. It was cool to finally do it....even if I almost made a big mistake
I always grab my Stabila LAX300G when need to get that perfect plumb mark on a building. Levels work great, but you can't beat the simplicity and perfection of a really good laser...and who doesn't love lasers.
Stabila lax 300g
https://amzn.to/30E9R3d
Also, the Martinez/RRBuildings collab hammer is available for a limited time and can be bought over at Martinez Tools Website.
https://martineztools.com/product/mtc-red-headed-step-child-m1/
If you'd like to support RRBuildings, below are various ways to help!
Shirts: https://rrbuildings.bigcartel.com/
Hats: https://www.beachandbarn.com/collections/kyle-stumpenhorst-rrbuildings
patreon: https://www.patreon.com/rrbuildings
Instagram: https://www.instagram.com/rrbuildings/
Check out the latest episode of the If You Build it Podcast with @Mikeythemaker and myself!!
iTunes : https://goo.gl/hWhMRw
Spotify : https://goo.gl/7awjQX
Видео Building a Hunting Cabin 3: Installing Wood Trusses канала RR Buildings
I always grab my Stabila LAX300G when need to get that perfect plumb mark on a building. Levels work great, but you can't beat the simplicity and perfection of a really good laser...and who doesn't love lasers.
Stabila lax 300g
https://amzn.to/30E9R3d
Also, the Martinez/RRBuildings collab hammer is available for a limited time and can be bought over at Martinez Tools Website.
https://martineztools.com/product/mtc-red-headed-step-child-m1/
If you'd like to support RRBuildings, below are various ways to help!
Shirts: https://rrbuildings.bigcartel.com/
Hats: https://www.beachandbarn.com/collections/kyle-stumpenhorst-rrbuildings
patreon: https://www.patreon.com/rrbuildings
Instagram: https://www.instagram.com/rrbuildings/
Check out the latest episode of the If You Build it Podcast with @Mikeythemaker and myself!!
iTunes : https://goo.gl/hWhMRw
Spotify : https://goo.gl/7awjQX
Видео Building a Hunting Cabin 3: Installing Wood Trusses канала RR Buildings
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Building A Hunting Cabin 4: Framing overhangs, Starting Roof SteelNEW Hunting Cabin Final: Plus Versetta Stone InstallWeld up Barndominium metal framing | E62 S3Cabin in the Woods: Intro and LayoutO.M.G. Part 11: Standing Seam Metal Roof Install DetailsBuild your own wood trussesIOWA Hunting CABIN Tour | BEYOND THE DIRT 010Building My Shop : Wood Stud Wall Framing, Door and Corner FramingHunting Cabin Construction "Tour" (Part 1)Building a Cabin from Pallet Wood: Cheap Off Grid HomesteadSiding a Small Off Grid Cabin With Western Red Cedar ShinglesDrawing Lumber with SketchUp Series Part 8 How to Draw Roof TrussesI built a Cabin in 2020 - Start to FinishBuilding a Hunting CabinBuilding a Large Garage: Tips and Tricks For Framing WallsHow To Build A Deck // DIY Home ImprovementHow to Build a Garage #1 - Layout and Concrete PiersCabin in the Woods: Interior Wall FramingHow to Install Trusses - Laying Out and InstallingJack Rafters