YMFC-3D part 2 - Connect RC transmitter and receiver - Arduino quadcopter.
PLEASE USE THE YMFC-AL (AUTO-LEVEL) SOFTWARE: https://youtu.be/DYpHB-LfloI
These videos are just for reference. The new software is much easier to setup and supports almost all transmitters.
You can download the Arduino sketch here:
http://www.brokking.net/ymfc-al_main.html
Arduino Bit Math Tutorial:
http://playground.arduino.cc/Code/BitMath
Видео YMFC-3D part 2 - Connect RC transmitter and receiver - Arduino quadcopter. канала Joop Brokking
These videos are just for reference. The new software is much easier to setup and supports almost all transmitters.
You can download the Arduino sketch here:
http://www.brokking.net/ymfc-al_main.html
Arduino Bit Math Tutorial:
http://playground.arduino.cc/Code/BitMath
Видео YMFC-3D part 2 - Connect RC transmitter and receiver - Arduino quadcopter. канала Joop Brokking
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Your Multicopter Flight Controller - 3D (YMFC-3D) Part 1 - Hardware.
STM32 for Arduino - Connecting an RC receiver should be easy, right?
Arduino drone - Part2 Transmitter & Receiver
YMFC-3D part 3 - How to connect a gyro - Arduino quadcopter.
How To Make A Flying Drone | DIY Arduino Drone | Indian LifeHacker
Arduino drone - Part1 Flight Controller
YMFC-3D part 5 – Quadcopter PID controller and PID tuning.
STM32 for Arduino - Connecting an RC receiver via input capture mode
My Wine-Glass Carrying, Self-Balancing Inverted Pendulum Robot
BEST COMPILATION of BAD (and CRASH) RC LANDINGS #5
MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code
How to make cheap Drone using Arduino Uno, MPU 6050 & Flysky i6 TX/RX
Arduino Uno Quadcopter
Arduino Drone Flight Controller - Multiwii | With Smartphone Control
YMFC-AL - Build your own self-leveling Arduino quadcopter - with schematic and code
MPU-6050 6dof IMU tutorial for auto-leveling quadcopters with Arduino source code - Part 2
Easy long range Arduino telemetry for the YMFC-32 DIY autonomous drone
From a diy Arduino quadcopter to a versatile octocopter flight controller.