DJI Phantom quad with Hero3 on Stabilized 2 axis gimbal
First flight with the 2 axis gimbal attached,
installation is easy, crack open the shell and plug the two axis servos into the NAZA port F1 and F2. I used extenders so I can swap them from the outside.
Then use the DJI setup software to enable Gimbal operations.. and set the center value to level the gimbal. done.. have fun flying.
Видео DJI Phantom quad with Hero3 on Stabilized 2 axis gimbal канала Bo Lorentzen
installation is easy, crack open the shell and plug the two axis servos into the NAZA port F1 and F2. I used extenders so I can swap them from the outside.
Then use the DJI setup software to enable Gimbal operations.. and set the center value to level the gimbal. done.. have fun flying.
Видео DJI Phantom quad with Hero3 on Stabilized 2 axis gimbal канала Bo Lorentzen
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
NAB 2016 HPRC P4 caseMojave Sunset Scenics GoPro4 2.7kSunset among Joshua TreesMini H quad - Replay XD720Hoten-X morning flight in HollywoodBeauty of Nature - sunset flightMan I love FPV - Slow dancing the mini-quad in the parkTALI evening flight in Mojave - GoPro 4FPV postcard from the high desertFlying the GolfClub with RichardFPV on Stage E at Robert Zemeckis Digital ArtsXmas FPVSCX10 FPV in the River BedDJI Phantom 2 axis gimbal - solved the JelloBudget FPV - Hoten-X with HoryzonHDTRD Beholder Lite Review part 1LETUS AnamorpX after hours in Lucerne Valley CaliforniaPhantom with STELLA brushless gimbal - no jello.!Mini H Quad - Maiden CRASHAutumn Colors - Mini-H FPVNAB 2018 Airborne Innovations thermal kit