Control Arduino Nano BLE with Bluetooth & Python

Control Arduino Nano BLE's RGB LED with Bluetooth & Python

See how you can control your Arduino Nano BLE and read sensor values and actuate controls, communicating with it via Bluetooth using Python, such as from a Windows, Mac or Linux machine like the Raspberry Pi! Demonstrated using the onboard RGB LED, you can utilize the same framework and add other sensors and actuators to the mix. The Arduino Nano 33 BLE Sense is chockfull of sensors like temperature, humidity, pressure, motion, vibration, orientation, color, brightness, proximity, gesture, and microphone.

See Project details including code and additional explanations at - https://create.arduino.cc/projecthub/sridhar-rajagopal/control-arduino-nano-ble-s-rgb-led-with-bluetooth-python-331e33

GitHub repository - https://github.com/protostax/ProtoStax_Arduino_Nano_BLE_RGBLED_Service

Getting started with the Arduino Nano 33 BLE Sense - https://www.arduino.cc/en/Guide/NANO33BLESense

This project uses the following:
1) Arduino Nano 33 BLE Sense
2) ProtoStax Enclosure for Breadboards and Custom Boards - https://bit.ly/3dNkx7y

------

The ProtoStax Breadboard enclosure is stackable, modular, extensible and hackable! Use it to quickly convert your prototype into a functional and good-looking product!

Works with any breadboard-friendly micro-controllers or single-board computers like the Arduino Nano, Adafruit Feather, Particle Argon, Raspberry Pi Pico and so on. A microUSB/USB plug cutout makes it great to power these and the rest of your circuitry.

This case fits a 1/2 sized breadboard, or 3 tiny/mini-sized ones. You can fit a full-sized breadboard by horizontally stacking two enclosures.

The case has an internal clearance of over 1.2 inches, which gives you ample room for components & wiring!

You can use this vanilla enclosure to house any custom board that fits its dimensions (see below).

The acrylic material & modular design make it eminently hackable. Drill cutouts or mounting holes into the side walls, top or base plate. You can modify a single side without affecting the others pieces (working with a single flat piece of acrylic is also easier). The modular design makes assembly a snap.

Extension kits and add-ons are available to add functionality to your enclosure - add , switches, ultrasonic sensor, DB9/RS232 port, micro-servo and more! Check out our extension kits and add-ons!

Видео Control Arduino Nano BLE with Bluetooth & Python канала ProtoStax