Sovol SV08 Power Supply & Electronics Bay Fan Upgrade

Welcome back to AndysTechLab! In today’s video, we’re diving into some upgrades on the Sovol SV08 3D printer — specifically focusing on the electronics bay.
We're swapping out the stock power supply, with a more powerful alternative that has an active fan. Plus, we’ll be replacing the control board fan and adding a dedicated fan for the MOSFET that controls the bed heating to help keep everything running at lower temperatures.
Whether you're modding your SV08 for performance, silence, or just love to tinker, this upgrade is a solid step towards a cooler, more reliable machine.

Don’t forget to like, comment, and subscribe if you enjoy practical 3D printer mods and honest tech upgrades.
Thanks for watching ATL!
#SovolSV08 #3DPrinterMods #TechUpgrades #AndysTechLab #Quiet3DPrinting #Mod

You like the content and want to support me? Buy me a coffee!
https://ko-fi.com/andystechlab

Basic Fan Configuration in printer.cfg
[fan_generic fanX] # mosfet fan
pin: PA6
max_power: 1.0

3D Printed Parts
PSU Mount
https://www.printables.com/model/1196209-sv08-larger-power-supply-mounting-bracket

Control board 8010 Fan
https://www.printables.com/model/1104389-sovol-sv08-elecronics-8010-fan-mount

Mosfet 8010 Fan
https://www.printables.com/model/1268452-sovol-sv08-mosfet-fan-bracket
Parts Used
Meanwell LRS-350 Power Supply
https://amzn.to/4jqqeYQ *

2x 8010 24v Fans
https://amzn.to/4jlEvX4 *
Additional Items
Filament I use
https://amzn.to/4lzb316 *

Filament Dryer
https://amzn.to/42NVXxg *

*These links are affiliate links, which means I may earn a commission at no extra cost to you.

Видео Sovol SV08 Power Supply & Electronics Bay Fan Upgrade канала Andy's Tech Lab