Water/Methanol Injector Design BREAKTHROUGH!
AEM has updated its Water/Methanol Injection systems again, this time with a breakthrough injector design that improves atomization to deliver faster inlet temp cooling and use less fluid to maintain cooling. This dramatic improvement in injector technology is coupled with a new WMI pump design that is 100% waterproof, making it safe for engine bay and frame rail mounting. The V3 injector replaces the old V2 injector in all of AEM’s WMI systems and it can be purchased as an upgrade to existing systems (PN 30-3313).
In testing at AEM, the new V3 250cc WMI nozzle and the V2 250cc WMI nozzle both achieved a 90-degree inlet temp reduction; however, the V3 nozzle design achieved this reduction nearly 6.5 seconds faster. Think about 6.5 seconds in a racing environment. Having 6.5 seconds to get to the point where additional timing can be applied is huge. Consider that on an average sportsman drag car this can represent close to 40% of track time. On a road race car, applying more timing 6.5 seconds faster can mean a critical time to pass on a corner exit.
We then tested a V3 250cc injector against a V2 500cc injector to see if the larger V2 injector would improve cooling speed. The V2 500cc injector achieved nearly identical cooling speed as the V3 250cc injector, but it required almost 44% more fluid to achieve the same cooling. Less fluid used means fewer refills of your WMI tank and less money spent refilling it. Using the V2 500cc nozzle with a one-gallon tank, you will get close to 7 minutes and 50 seconds of run time at full pressure. Using the V3 250cc nozzle with a one-gallon tank, you will get 13 minutes and 30 seconds of run time at full pressure.
Timestamps:
00:37- What’s in the WMI kit?
3:01- V3 Pump Weather Proof Pump
3:30- The Bits
5:09- Wiring Harness
5:31- Safety PSA
5:51- AEM Controller
8:12- New V3 Nozzle Explained
10:01- Static Bench Testing
11:08- Inline Solenoid Explained
11:49- V2 Nozzle Static Test
12:39- V3 Nozzle Static Test
13:42- Dynamic Bench Testing
15:34- Dynamic Data Analysis
Follow AEM Performance Electronics on Social Media:
Facebook: https://www.facebook.com/aemelectronics
Instagram: https://www.instagram.com/aemelectronics/?hl=en
Twitter: https://twitter.com/aemelectronics
Shop Merch here! https://www.aemelectronics.com/products/apparel
Want more info? Please visit our website at https://www.aemelectronics.com!
Видео Water/Methanol Injector Design BREAKTHROUGH! канала AEMpowerTV
In testing at AEM, the new V3 250cc WMI nozzle and the V2 250cc WMI nozzle both achieved a 90-degree inlet temp reduction; however, the V3 nozzle design achieved this reduction nearly 6.5 seconds faster. Think about 6.5 seconds in a racing environment. Having 6.5 seconds to get to the point where additional timing can be applied is huge. Consider that on an average sportsman drag car this can represent close to 40% of track time. On a road race car, applying more timing 6.5 seconds faster can mean a critical time to pass on a corner exit.
We then tested a V3 250cc injector against a V2 500cc injector to see if the larger V2 injector would improve cooling speed. The V2 500cc injector achieved nearly identical cooling speed as the V3 250cc injector, but it required almost 44% more fluid to achieve the same cooling. Less fluid used means fewer refills of your WMI tank and less money spent refilling it. Using the V2 500cc nozzle with a one-gallon tank, you will get close to 7 minutes and 50 seconds of run time at full pressure. Using the V3 250cc nozzle with a one-gallon tank, you will get 13 minutes and 30 seconds of run time at full pressure.
Timestamps:
00:37- What’s in the WMI kit?
3:01- V3 Pump Weather Proof Pump
3:30- The Bits
5:09- Wiring Harness
5:31- Safety PSA
5:51- AEM Controller
8:12- New V3 Nozzle Explained
10:01- Static Bench Testing
11:08- Inline Solenoid Explained
11:49- V2 Nozzle Static Test
12:39- V3 Nozzle Static Test
13:42- Dynamic Bench Testing
15:34- Dynamic Data Analysis
Follow AEM Performance Electronics on Social Media:
Facebook: https://www.facebook.com/aemelectronics
Instagram: https://www.instagram.com/aemelectronics/?hl=en
Twitter: https://twitter.com/aemelectronics
Shop Merch here! https://www.aemelectronics.com/products/apparel
Want more info? Please visit our website at https://www.aemelectronics.com!
Видео Water/Methanol Injector Design BREAKTHROUGH! канала AEMpowerTV
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
DYNO TEST: HOW MUCH POWER DOES WATER-METHANOL INJECTION WITH A CUSTOM TUNE REALLY ADD?! (BMW F80 M3)WaterInjectionAEM Water Methanol Kit Explained (with the new V3 Nozzle)WHO'S COOLER? WATER METH vs INTERCOOLERHow to : Install WATER/METHANOL INJECTION SYSTEMSAEM V3 Water Methanol Injection SystemIntercooler Vs. Methanol—Engine Masters Preview Ep. 45VR30DDTT Direct Port Water MethanolWhy You Need Water/Methanol and How the VC-50 Can Help You Achieve Your Goals.199garage unboxing - WATER/METHANOL INJECTION SYSTEMSWater Methanol Injection InstallationTru-BoostX Gauge Set-Up and DYNO RUNHow BMW Used Water To Make +50 HorsepowerTESTED! AEM Fuel Pump Vs KNOCKOFF Pump!Which Water-Methanol Injection Kit is Right For You?Does METH ADD POWER without a TUNE? + A90 Supra Meth Injection DIYE85 vs Methanol Injection SMACKDOWNHOW METH INJECTION WORKS & DYNO RESULTS | VORTEC SUPERCHARGED FORD MUSTANGHow To: AEM Water Meth Injection Step by Step Install Subaru WRX STI 2doorProject Street Sleeper Part 9: Methanol Injection Install