mini gaming pc build with lattepanda sbc

#dfrobot #technology #raspberrypi
Wanted to see if the lattepanda delta 3 mini pocket computer would
fit into a mini nintendo game system case so i modded one and test
some PC games.

LattePanda Delta 3 : https://www.lattepanda.com/lattepanda-3-delta

check out DFROBOT here https://www.dfrobot.com/?gclid=CjwKCAjwyaWZBhBGEiwACslQo56Q_jXM5QV0OWSaMIxzkzr7MwESuokxBMT-unRjmW3hJzRvi01pHxoCJh4QAvD_BwE

Games tested 1080p low: Serious Sam 3/ Call Of Duty Black Ops 2 Zombies/ Valorant

Specification
Components
LattePanda 3 Delta
Processor
Intel® Celeron® N5105
Core
2.0-2.9GHz Quad-Core, Four-Thread
Graphics
Intel® UHD Graphics (Frequency: 450 – 800MHz)
Memory
LPDDR4 8GB 2933MHz
Storage
64GB eMMC
Connectivity
●1x Wi-Fi 6 @ 2.4/5 GHz　　●1x Bluetooth 5.2　　●1x Gigabit Ethernet
Audio
Microphone + Headphone Combo Connector
GPIO & Other Features
●12x Analog Inputs* 　● Up to 23x Digital Input/Output (7 PWM)* 　●1x UART ●1x I2C　●1x SPI　●1x Audio Connector　●1x 4-Pin RS232 Header　　　　　●1x Fan Port (4 Pin 1.25mm PWM 5V）　●1x 4-Pin Header (Power and Switch)
USB
●2x USB 3.2 Gen1 Type A　　●1x USB 3.2 Gen2 Type A　　　　　　　　　●1x USB Type C, Supports PD, DP, USB 2.0　　●1x USB 2.0 Pin Header
Display
●1x HDMI 2.0b: Up to 4096x2160 @ 60Hz HDR Support
●1x DP1.4: Up to 4096x2160 @ 60Hz HDR Support
●1x eDP : Extendable Touch Displays up to 1920*1080
Expansion Slots
●1x M.2 M Key, PCIe 3.0 2x, Supports NVMe SSD ●1x M.2 B Key, PCIe 3.0 1x, Supports USB 2.0, USB 3.0, SATA, SIM
Co-Processor
ATMEGA32U4
Power
●DC Jack Input: 12V DC　　　●Type-C Input: 12/15V DC
Dimensions
125 x 78 x 16mm
Operating Temperature
0°C~75°C
*Available on Arduino Pin Header
Be sure to follow me on these platforms as well
https://twitter.com/modstek
https://www.instagram.com/modstek/?hl=en
https://www.facebook.com/Modstek
EMAIL................... Modstek@gmail.com

Видео mini gaming pc build with lattepanda sbc канала modstek