Lecture 30: OSPF DR/BDR, Passive Interface, Loopback & Authentication | CCNA + CCNP | Tabish4IT

🎓 Lecture 30 – OSPF DR & BDR | Passive Interface | Authentication | CCNA 200-301 Hindi/Urdu

Welcome to Lecture 30 of the Free CCNA 200-301 Full Course in Hindi/Urdu!
This lecture dives into some critical OSPF concepts that every network engineer must know. We not only cover theory but also perform practical labs in Packet Tracer and GNS3 to solidify your understanding.

📺 Watch Now: https://www.youtube.com/watch?v=amuQlwp0RxQ

🧠 Topics Covered in This Video:

✅ DR (Designated Router) & BDR (Backup Designated Router)
🔹 Why DR/BDR are required in multi-access networks
🔹 How routers decide DR/BDR (Priority, Router ID)
🔹 Live Lab Demo in GNS3

✅ Passive Interface in OSPF
🔹 Why and where to use passive interfaces
🔹 How to configure it correctly

✅ Loopback Interface Role in OSPF
🔹 Importance in Router ID selection
🔹 How to configure and use loopbacks efficiently

✅ Point-to-Point Network in OSPF
🔹 Realistic lab setup for point-to-point links
🔹 DR/BDR role in point-to-point vs multi-access

✅ Shortcut to Advertise All Interfaces in OSPF
🔹 Save time with correct wildcard masks
🔹 Quick and clean OSPF configuration method

✅ OSPF Authentication
🔐 Secure your routing protocol
🔐 Configure simple password authentication in OSPF lab

📌 Perfect For:

CCNA Students

Networking Beginners

Anyone preparing for Network Admin roles

Engineers wanting deep understanding of OSPF

📚 Full CCNA Playlist: https://www.youtube.com/@Tabish4IT/playlists

🔔 Don’t forget to Subscribe and Share to support free technical education!

#OSPF #DRBDR #PassiveInterface #CCNAHindi #OSPFAuthentication #LoopbackOSPF #GNS3Lab #PacketTracerLab #FreeCCNACourse

Видео Lecture 30: OSPF DR/BDR, Passive Interface, Loopback & Authentication | CCNA + CCNP | Tabish4IT канала Tabish4IT