How to Install a Solar Fence Charger: Electric Fence 101 | Zareba®

Shop all solar powered electric fence chargers at http://www.zarebasystems.com/store/electric-fence-chargers/solar-powered

Learn more about the best fence chargers at http://www.zarebasystems.com/learning-center/compare-electric-fence-supplies/fence-chargers
INSTALLING SOLAR-POWERED FENCE CHARGERS

Solar chargers are ideal for isolated pastures or temporary corrals where no electric outlets are available. You can find solar chargers small enough to keep rabbits out of your garden, large enough to contain bulls, and everything in between.
This video will walk you through the basics of installing a solar fence charger for your electric fence.
HOW TO CHARGE YOUR SOLAR ENERGIZER

The most crucial step for solar charger operation begins before installation. Solar fence chargers come with one or two pre-installed batteries that need to be charged. To ensure optimal battery life, place the charger in the sun in the OFF position for three days before turning ON to properly charge the battery before your first use.
These batteries store the energy the solar panels produce from the sun. A fully charged solar battery can last up to 2 weeks without sunlight. And with proper care, these batteries will last 3 to 4 years before they need to be replaced.
PICK A SUNNY LOCATION FOR YOUR SOLAR CHARGER

Once the solar battery has been charged, identify an ideal location for the charger. Mount your charger off the ground in a location that receives full sunlight throughout the day. Face the solar panels toward noontime sun, which is south in the northern hemisphere. Make sure the solar panel is not covered with shade from nearby trees or buildings and that you occasionally clean the solar panels to clear debris.
You will want to keep your solar charger near your grounding rod setup to minimize the length of your hookup wires. And to maximize power throughout your fence, position the solar charger in the middle of your fence, so the end of the fence line is never too far away from the charger.
HOW TO CONNECT YOUR SOLAR FENCE CHARGER

Before you switch your electric fence charger to the ON position, follow these steps:
- Connect your grounding wire to the ground terminal. (Look for the “Ground” symbol on your charger)
- Next connect that wire to a ground rod system using insulated wire and ground rod clamps.
- Finally, connect the fence wire to the fence terminal. (Look for “Hot fence” symbol on your charger)
After both connections have been made on your charger, you can now turn the unit ON...To confirm your unit is working, look for a light on the charger, and use a voltage or fence tester, both available from zarebasystems.com, to determine if you have the adequate voltage on your fence line.
Once you’ve confirmed adequate voltage for your system at multiple points along your fence line, you’ve successfully installed your charger!
HOW SOLAR FENCE CHARGERS WORK

Solar chargers use a simple technique to energize a pasture or enclosed area.
The sun shines on the solar cells, and these cells transfer the energy into a battery. The battery stores the energy to be released on your fence lines.
When the charger is turned on, voltage is sent through the electric fence wire.
SOLAR FENCE CHARGER MAINTENANCE

Solar fence systems are relatively hands off in terms of maintenance after installation. You’ll want to monitor your voltage levels occasionally. This helps get ahead of potential voltage loss on your fence lines from external factors like weed growth, weather related events, or other objects pulling the fence power down.
With proper installation and maintenance, you’ll have a successful animal containment solution that will keep your animals safe for years to come…
YOUR ELECTRIC FENCE QUESTIONS

Hopefully this video has cleared up a few questions for your solar-powered energizer installation. If you have additional questions, give us a call at 855-592-7322.

Видео How to Install a Solar Fence Charger: Electric Fence 101 | Zareba® канала Zareba® Systems