Stop Overpaying for DMX — Control Moving Heads for Under $50!

Want to add moving heads to your holiday light show — without spending $200-$300 on a high-end pixel controller? In this video, we show you how to control professional DMX moving heads for under $50 using the RGB2Go Solo2Go controller and DMX2Go adapter. We'll walk through everything: flashing ESPixelStick firmware, configuring DMX output, setting up your moving head in xLights, and building your first sequence — complete with pan, tilt, color changes, and value curves.
Whether you're a seasoned show builder or just getting started, this is the most affordable way to get moving heads into your show.

🛒 GEAR USED IN THIS VIDEO
🔵 Solo2Go 1-Port Pixel Controller — https://rgb2go.com/collections/controllers/products/solo2go-1-port-wi-fi-pixel-controller
🔵 DMX2Go Adapter — https://rgb2go.com/products/dmx2go-adapter
🔴 150W Moving Head (Amazon) — https://www.amazon.com/dp/B09Y9DVG47

🔧 DOWNLOADS & TOOLS
⚙️ ESPixelStick Web Flasher — https://espixelstickwebflasher.from-ct.com:5000/
⚙️ CP210x Serial Driver (required to flash your ESP32)

Windows: https://www.silabs.com/documents/public/software/CP210x_Windows_Drivers.zip
(Unzip into a new folder and run CP210xVCPInstaller_x64.exe)
Mac: https://www.silabs.com/documents/public/software/Mac_OSX_VCP_Driver.zip

Questions? Drop them in the comments below. Don't forget to like and subscribe for more holiday lighting tutorials!

Видео Stop Overpaying for DMX — Control Moving Heads for Under $50! канала RGB2Go