Easy To Make Lathe Mounted Diamond Lapping Table Lap Carbide Tools
Make a heavy duty diamond lapping set which can be mounted on many different lathes. Used to finish lap and put a chosen radius size on carbide tooling. Shown in use both on the Myford ML7 and the Chinese Mini Lathe.
Видео Easy To Make Lathe Mounted Diamond Lapping Table Lap Carbide Tools канала Steve Jordan
Видео Easy To Make Lathe Mounted Diamond Lapping Table Lap Carbide Tools канала Steve Jordan
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Making A Gun Oiler Pot On The Chinese Mini Lathe Part 2](https://i.ytimg.com/vi/PASdjOjCehg/default.jpg)
![How To Set Up & Use a 3" Inch Slitting Saw Chinese Mini Lathe & Myford](https://i.ytimg.com/vi/SS4GyJJ0pBg/default.jpg)
![Carbide with mirror finish using diamond compound, less than $30 from Banggood](https://i.ytimg.com/vi/SWvOzXF7dBc/default.jpg)
![Precision Lapping 101](https://i.ytimg.com/vi/j9FsmsjXKx8/default.jpg)
![Making Double Ended Lathe Tools Brazing Carbide With Bullfinch Propane Gas Torch](https://i.ytimg.com/vi/43f8AfjkpJw/default.jpg)
![A Brief Chat about Carbide Tooling](https://i.ytimg.com/vi/rsFFWYo8ugw/default.jpg)
![How To Make A Very Useful Multi-Purpose HSS Turning Tool.](https://i.ytimg.com/vi/gigLlFZIbTU/default.jpg)
![How To Make A Low Cost Indexing Chuck Assembly For The Bench Or Pillar Drill](https://i.ytimg.com/vi/qCYsXHdzxY8/default.jpg)
![A Neat Die Grinder Hack. Easy to Make Lathe Toolpost Drill Set-Up](https://i.ytimg.com/vi/s6Dwxx5Va7w/default.jpg)
![How to sharpen carbide on a slow speed grinder. Part 2](https://i.ytimg.com/vi/jZxb98UtK-Y/default.jpg)
![Slowspeed carbide grinder](https://i.ytimg.com/vi/GOBtH4m2TYo/default.jpg)
![Low Cost Metal Lathe Machining Materials Making A Pot From Phenolic Resin](https://i.ytimg.com/vi/xdfoHosCne0/default.jpg)
![How To Engage / Disengage The Backgear On The Myford ML7](https://i.ytimg.com/vi/cZIlcAJqHqw/default.jpg)
![Tighten Up Saddle and Slides on Mini Lathe](https://i.ytimg.com/vi/BrOnFfiBo6A/default.jpg)
![Make A Multi Purpose MT2 Live Centre With An ER11 Collet Chuck](https://i.ytimg.com/vi/L0ZTw5J8oTE/default.jpg)
![Diamond wheel for the grinder.](https://i.ytimg.com/vi/dtEOz1AESp4/default.jpg)
![Testing some $1.50 USD CNMG 432 inserts and a holder from Banggood, surprising results...!!!](https://i.ytimg.com/vi/zUpBZW1YlFw/default.jpg)
![Making a Keyway Cutting Tool for the Shaper](https://i.ytimg.com/vi/GLQqBUCO0gI/default.jpg)
![Easy To Make Ball Turning Fixture Using Brass Plumbing Couplings](https://i.ytimg.com/vi/tplUdJDIWZE/default.jpg)
![50MM Boring Head For Use On My Myford & Chinese Mini Lathe](https://i.ytimg.com/vi/buaKfO2k2ko/default.jpg)