How to construct your Pestrol Possum / Cat Traps
Easy video instructions on putting together your Pestrol humane Possum and Feral Cat traps.
Transcript:
"Okay, you're just received your Pestrol possum trap or feral cat trap. I recommend opening the box where the sign does say, "Open" only because it makes it easier to pull it out from the box. Okay. Place it with handle pointing upwards. You can either use a knife or just some pliers to cut these cable ties. There should be two here. Okay, just get rid of those. Now this is a new supporting arm. You move this out of the way and then pull up the handle. It goes into shape. The older units probably don't have a supporting arm with this on the base. It used to just be one either side and didn't give the possum trap as much protection as it should. This just slides down underneath. That is good to go.
I'll turn this around, so you can see how to attach the following compartments. This here is to secure the back. We'll do that in a few moments' time. Sometimes it comes connected already, sometimes it isn't. You want to use the hook end to attach to the plate inside the trap. This end will explain to you what to do with that in a few moments. Get the hook end, and you want to have it pointing upwards. Take it into the trap, and you'll see a hole right there on the right hand side. Just click it through like so, and you're good to go. Now at this end, you'll see that there are two hook shapes, one closer into the trap and one to the outside. This is probably the trickiest part of the trap, but this rod goes through to the outside one, it just sits around on the outside, so it hooks through. I'll move my fingers out of the way, so you can see.
This other one here is free, and then you'll notice down here on the door that there's a roller. This is where this one is going to go into place. Now to open the door, you push down on the top, and you'll see that pushes that back and enables me to lift the door up. You just want to make sure this is out of the way there to the side, that's all right, okay. Then this hook just connects underneath like so. The trap is set at that point. Now we have this securing wire, so to speak, for the back door. There's two holes. I recommend putting it into the top one, sliding it through both of these holes here and then through the final hole on the other side. In fact, what I should've done is place them through here, through there, through there, through the top hole on the other side, and then we can just flip that into place. That is now locked in so the possum or cat can't leave, and you can use it later on for removing the cat.
You'll notice now the trap is set. You put food on the other side, they'll walk on the plate, it shuts down. Finally, just again to show you how to reset, push the handle down, lift the door up. This plate here just goes straight back onto the roller, and you'll see again, you're good to go. Now the handle is quite well-protected if you do have a cat, and they're trying to just scratch out, you'll be protected. Again, just to release, open up the back door, and they can move through that way. We find for possums, the best thing to use is fruit but have a look on our website or eBay page to find out for some more details. I hope that helps."
View our Possum Trap: https://www.pestrol.com.au/buy-online/possum-trap/
View our Cat Trap: https://www.pestrol.com.au/buy-online/feral-cat-trap-large/
Twitter: http://www.twitter.com/Pestrolproducts
Facebook: https://www.facebook.com/pages/Pestrol/156918744321719?fref=ts
For all your pestrol products visit www.pestrol.com.au
Видео How to construct your Pestrol Possum / Cat Traps канала Pestrol Professional
Transcript:
"Okay, you're just received your Pestrol possum trap or feral cat trap. I recommend opening the box where the sign does say, "Open" only because it makes it easier to pull it out from the box. Okay. Place it with handle pointing upwards. You can either use a knife or just some pliers to cut these cable ties. There should be two here. Okay, just get rid of those. Now this is a new supporting arm. You move this out of the way and then pull up the handle. It goes into shape. The older units probably don't have a supporting arm with this on the base. It used to just be one either side and didn't give the possum trap as much protection as it should. This just slides down underneath. That is good to go.
I'll turn this around, so you can see how to attach the following compartments. This here is to secure the back. We'll do that in a few moments' time. Sometimes it comes connected already, sometimes it isn't. You want to use the hook end to attach to the plate inside the trap. This end will explain to you what to do with that in a few moments. Get the hook end, and you want to have it pointing upwards. Take it into the trap, and you'll see a hole right there on the right hand side. Just click it through like so, and you're good to go. Now at this end, you'll see that there are two hook shapes, one closer into the trap and one to the outside. This is probably the trickiest part of the trap, but this rod goes through to the outside one, it just sits around on the outside, so it hooks through. I'll move my fingers out of the way, so you can see.
This other one here is free, and then you'll notice down here on the door that there's a roller. This is where this one is going to go into place. Now to open the door, you push down on the top, and you'll see that pushes that back and enables me to lift the door up. You just want to make sure this is out of the way there to the side, that's all right, okay. Then this hook just connects underneath like so. The trap is set at that point. Now we have this securing wire, so to speak, for the back door. There's two holes. I recommend putting it into the top one, sliding it through both of these holes here and then through the final hole on the other side. In fact, what I should've done is place them through here, through there, through there, through the top hole on the other side, and then we can just flip that into place. That is now locked in so the possum or cat can't leave, and you can use it later on for removing the cat.
You'll notice now the trap is set. You put food on the other side, they'll walk on the plate, it shuts down. Finally, just again to show you how to reset, push the handle down, lift the door up. This plate here just goes straight back onto the roller, and you'll see again, you're good to go. Now the handle is quite well-protected if you do have a cat, and they're trying to just scratch out, you'll be protected. Again, just to release, open up the back door, and they can move through that way. We find for possums, the best thing to use is fruit but have a look on our website or eBay page to find out for some more details. I hope that helps."
View our Possum Trap: https://www.pestrol.com.au/buy-online/possum-trap/
View our Cat Trap: https://www.pestrol.com.au/buy-online/feral-cat-trap-large/
Twitter: http://www.twitter.com/Pestrolproducts
Facebook: https://www.facebook.com/pages/Pestrol/156918744321719?fref=ts
For all your pestrol products visit www.pestrol.com.au
Видео How to construct your Pestrol Possum / Cat Traps канала Pestrol Professional
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
