Stripping (removing) Floor Finish From VCT Floors

Steps Selection:
Introduction equipment, chemicals, and tools: 0:21
Mixing the floor remover (Ultra Stripper): 2:21
Mixing the neutralizing solution (Ultra Neutralizer) 3:17
Applying the floor finish remover solution: 3:58
Removing the floor finish with the floor machine: 4:55
Applying and rinsing with Neutralizer: 5:09
Removing floor finish from the open areas of the floor: 7:13
Job completed: 10:50

This video shows step by step, how to strip or remove from the finish from VCT floors. Removing the floor finish is, without a doubt, the most challenging task in floor care. This video shows the following procedures:

1. Mixing the floor finish stripper and neutralizer

2. Needed equipment, chemicals, and tools

3. Floor finish stripper application

4. How to use floor stripper neutralizer and to properly neutralize the floor stripping solution from a floor

5. Proper floor rinsing

To strip the floor finish from our sample floor, we used Ultra Stripper, and to neutralize the stripping solution, we used Ultra Neutralizer. For the following advantage:

Ultra Stripper:

Fast-acting requires no dwell time

Effectively removes most of the floor finish in one pass.

Environmentally friendly

Safe to use, effective with low pH and low odor

For more information contact:

Ultra Chem Labs

www.ultrachemlabs.com

Music Credits: Smart Sound Music

Video Produced By C Castro

Видео Stripping (removing) Floor Finish From VCT Floors канала TheCleaningVideos