Miata Rain Gutter replacement
The rain gutter in Mazda MX-5 is broken and has to be changed. The broken rain gutter in the Miata will be replaced by a new one. When you put in a new rain rail you need to be sure that the soft top is placed in the rail. It is good to tighten the nuts on the sides first, then in the middle. After that you fasten them from the sides towards the middle. So in this video you can see how to install a rain rail in Mazda MX-5 Miata.
0:00 Intro
0:17 Remove passenger seat for better access
0:40 Remove the cover
0:54 Take off the cover
1:04 Loosen the nuts
1:30 Remove the brackets
3:07 Remove the old rain gutter
3:33 Clean and paint!
3:48 Place the new gutter
4:16 Place the soft top into the gutter
5:19 Place the brackets
5:42 First place all the nuts finger tight
6:13 Place the second bracket
6:37 Remove the temporary nuts
7:16 according to a sequence
9:29 Span the nuts to the right torque
10:13 Checking for leaks
10:49 Place and fasten the cover
11:10 Connect the speaker wires
11:18 Fasten the seat bolts
#miata #mazdamx5miata #rainrail #doityourself #repair @finholmfixar9603
Видео Miata Rain Gutter replacement канала Finholm Fixar
0:00 Intro
0:17 Remove passenger seat for better access
0:40 Remove the cover
0:54 Take off the cover
1:04 Loosen the nuts
1:30 Remove the brackets
3:07 Remove the old rain gutter
3:33 Clean and paint!
3:48 Place the new gutter
4:16 Place the soft top into the gutter
5:19 Place the brackets
5:42 First place all the nuts finger tight
6:13 Place the second bracket
6:37 Remove the temporary nuts
7:16 according to a sequence
9:29 Span the nuts to the right torque
10:13 Checking for leaks
10:49 Place and fasten the cover
11:10 Connect the speaker wires
11:18 Fasten the seat bolts
#miata #mazdamx5miata #rainrail #doityourself #repair @finholmfixar9603
Видео Miata Rain Gutter replacement канала Finholm Fixar
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![Isolera garagedörr tillfälligt](https://i.ytimg.com/vi/bLRb7snMN9c/default.jpg)
![Thawing a Frozen Cold Water Pipe](https://i.ytimg.com/vi/-awiTic8zP0/default.jpg)
![Tina fruset vattenrör](https://i.ytimg.com/vi/878xhIijh-I/default.jpg)
![Virka kil till ärmen på en kofta gjord av mormorsrutor](https://i.ytimg.com/vi/bNOm0DFiuhA/default.jpg)
![Virka en knapp](https://i.ytimg.com/vi/rDeA7PWoZ1A/default.jpg)
![Virka ihop en kofta av mormorsrutor](https://i.ytimg.com/vi/O4Z4IYM8FMM/default.jpg)
![Montera el-motor på en cykel](https://i.ytimg.com/vi/o80ciGnR1qM/default.jpg)
![Paddling i Larsmo skärgård, högvatten och lågvatten](https://i.ytimg.com/vi/xUz6PvA4Xh8/default.jpg)
![Paddling i Larsmo skärgård -Rusning vid fisktrappan](https://i.ytimg.com/vi/mtMrXDAai-Q/default.jpg)
![How to make a touring strap for Split Board binding](https://i.ytimg.com/vi/7AqypNWM9Zo/default.jpg)
![Reparera spetsen på slalomskida](https://i.ytimg.com/vi/ah90lBcDSaM/default.jpg)
![Lappa jeans -med lapp på insidan av tyget](https://i.ytimg.com/vi/9PIrmO36DNc/default.jpg)
![Lappa byxor i grenen](https://i.ytimg.com/vi/zFDAqLWMLs4/default.jpg)
![Lappning av ABS plast](https://i.ytimg.com/vi/tIFcHlu3eyk/default.jpg)
![Longboard Surfing Ohtakari Finland](https://i.ytimg.com/vi/AYyQwf_qgCU/default.jpg)
![Virka grytlapp av mormorsrutor](https://i.ytimg.com/vi/YUFqQNhLajw/default.jpg)
![Paddling -räddningsövningar](https://i.ytimg.com/vi/WLN7pvoZREk/default.jpg)
![Paddling i Larsmo skärgård -Olavsörarna](https://i.ytimg.com/vi/NKE4nqGIyjI/default.jpg)
![Paddling i Larsmo skärgård -runt Gloskäret på insidan](https://i.ytimg.com/vi/PFPg6LSQAcI/default.jpg)
![Paddling i Larsmo Skärgård -genom Bosund by](https://i.ytimg.com/vi/wybG-tiR2uM/default.jpg)
![How to repair a Wetsuit](https://i.ytimg.com/vi/X9zcnybAfE0/default.jpg)