Why Robot Floor Rails Shake or Deform — Annealing & Drive Selection | EVST

A floor rail that shakes or deforms drags the robot's repeatability with it. The cause is almost always two cut corners — and both are fixable in the spec.

• Shake vs deform — and why both destroy repeatability
• Cause 1: structure not stress-relief annealed, deforms over time
• Cause 2: motor/reducer/drive loosely matched, shake at start/stop
• A rigid rail: fully annealed structure + rack-and-pinion/servo/precision reducer sized to load + QC
• Spec by payload (rail size), travel (jointed build), accuracy (drive + annealing)

Contact us for floor-rail selection and a quote: https://www.evsrobot.com/contact-us_d2
sales@evsrobot.com
Tel / WhatsApp / WeChat: +86 19381626253
Full guide: https://www.evsrobot.com/robot-floor-rail-vibration-deformation-annealing-drive.html

#RobotRail #SeventhAxis #TravelAxis #RobotWelding #IndustrialAutomation

Видео Why Robot Floor Rails Shake or Deform — Annealing & Drive Selection | EVST канала EVST ROBOT