Crashworks3D Iron Man Helmet Servo Controller for Arduino Nano
247 subscriber face reveal!
So, you managed to get a hold of a 3D printed Iron Man helmet, then were successful in attaching the hinges and servo motors for the face plate. 07:47
You choose not to hack the servo motors to run "analog" https://youtu.be/UCuKg5RrsPA
well, here is a little video to get you started on your journey to using micro controllers !
Just of note, I have no affiliation with any person or products linked here, as I stated in the video; Crashworks3D made this happen, they wrote the cool code for the Arduino! https://github.com/crashworks3d/Iron_Man_Servo
I bought the Arduino nano's from Amazon, no link because the person I bought from were out of stock. My advice is read the description as well as "user questions" you should quickly find if you will have any USB driver issues.
I'm sure the breadboard was bought on Amazon, you can get kits with the jumper wires included. I have Arduino kits that included breadboards. Just find one in the colour you like, they are cheap and handy.
The PowerBoost and Battery (and the soldering Iron, many years ago) were bought from Solarbotics: https://solarbotics.com/ , again, no affiliation, just a regular place I've bought from.
Видео Crashworks3D Iron Man Helmet Servo Controller for Arduino Nano канала BesideUpside
So, you managed to get a hold of a 3D printed Iron Man helmet, then were successful in attaching the hinges and servo motors for the face plate. 07:47
You choose not to hack the servo motors to run "analog" https://youtu.be/UCuKg5RrsPA
well, here is a little video to get you started on your journey to using micro controllers !
Just of note, I have no affiliation with any person or products linked here, as I stated in the video; Crashworks3D made this happen, they wrote the cool code for the Arduino! https://github.com/crashworks3d/Iron_Man_Servo
I bought the Arduino nano's from Amazon, no link because the person I bought from were out of stock. My advice is read the description as well as "user questions" you should quickly find if you will have any USB driver issues.
I'm sure the breadboard was bought on Amazon, you can get kits with the jumper wires included. I have Arduino kits that included breadboards. Just find one in the colour you like, they are cheap and handy.
The PowerBoost and Battery (and the soldering Iron, many years ago) were bought from Solarbotics: https://solarbotics.com/ , again, no affiliation, just a regular place I've bought from.
Видео Crashworks3D Iron Man Helmet Servo Controller for Arduino Nano канала BesideUpside
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
How To Motorize an Iron Man Helmet | PART 3| Coding and Servos | Ft. Crashworks 3D's Alisha BoardIron Man Helmet Arduino SetupArduino Nano and Sound Expansion A L I S H A and S U E boards from Crashworks test demonstrationYou can learn Arduino in 15 minutes.Iron Man repulsor 2.0UPDI Programming an ATmega4808Iron Man MK85 Cosplay Update 11 | Repainting The Suit!How To Motorize an Iron Man Helmet | PART 1 | Hinge System InstallMK5 Iron Man Helmet that OPENS! [How To Make]REAL IRON MAN REPULSOR + GIVEAWAY!REAL Iron Man Missile Launcher That SHOOTS! DIY3D Printed Iron Man Helmet PART 3 Electronics, Arduino, Wirering Schematics LEDs Servo motorsArduino Nano Every Setup and TestingArduino Basics 101: Hardware Overview, Fundamental Code CommandsDIY Motorized Ironman Helmet using a 3D Printer and Arduino | 1:1 MK3 HelmetHow to build Iron Man MK5 helmetYouTuber @the Hacksmith shows off his Iron Man helmet, Captain America Shield & more | Your MorningIron Man Sculpture Timelapse - Avengers: Infinity War/EndgameHow to install Libraries in Arduino IDE by Manmohan PalEasy Addressable LEDs with Arduino! WS2812B Tutorial