Making a Li-Ion 12V 3S Battery Pack (Not a tutorial!)
NOT A TUTORIAL!!!
If you want to try it on your own here's the list of the materials. But, again, this video is not detailed enough to be a tutorial.
Materials I used:
-6x 18650 cells (Li-Ion)
-DC-005 female DC power jack
-HX-3S-01 BMS board (READ THE EDIT BELOW)
-Wires
-18650 Spacers (I 3D printed them, but you can buy them if you don't own a 3D Printer)
You also need all the soldering equipment
EDIT: The module listed before is pretty terrible as far as reliability. I had 3 of them and all of 3 have failed. I'm not sure if I did something wrong. Anyways since then I replaced it with the "HX-JH-001" which has worked flawlessly for the past couple of months.
TL;DR: Get the "HX-JH-001" it's better in any way.
Видео Making a Li-Ion 12V 3S Battery Pack (Not a tutorial!) канала FrederickTL
If you want to try it on your own here's the list of the materials. But, again, this video is not detailed enough to be a tutorial.
Materials I used:
-6x 18650 cells (Li-Ion)
-DC-005 female DC power jack
-HX-3S-01 BMS board (READ THE EDIT BELOW)
-Wires
-18650 Spacers (I 3D printed them, but you can buy them if you don't own a 3D Printer)
You also need all the soldering equipment
EDIT: The module listed before is pretty terrible as far as reliability. I had 3 of them and all of 3 have failed. I'm not sure if I did something wrong. Anyways since then I replaced it with the "HX-JH-001" which has worked flawlessly for the past couple of months.
TL;DR: Get the "HX-JH-001" it's better in any way.
Видео Making a Li-Ion 12V 3S Battery Pack (Not a tutorial!) канала FrederickTL
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
Turning an old hard drive into a sanderArduino RC Car MK2 BuildMaking an external monitor out of a broken laptopBuilding a foam cutter3D Printed Apple Thunderbolt Display BuildHow to weld/bond 3D prints with a soldering ironArduino RC Car MK3 Build - "MK2" Teardown & Testing LightsAnet A8 3D Printer BuildArduino RC Car MK3 Build - Steering completed and final assembly3D Printed Virtual Reality HeadsetArduino RC Car MK3 Build - Wheel painting & steering systemChappie 3D Printed Head - Part 1Arduino RC Car MK4 BuildArduino RC Car MK4.1 - A small makeoverArduino RC MK1 BuildArduino RC Car MK3 Build - Foam cutter upgrade & 18650s testingHow to fix stick drift on the Xbox One controller (Requires Soldering)Repairing a broken Nintendo 2DS XL I bought from eBayBuilding a Pigeon HousePrinting Flex Filament (TPU) on the Anet A8