Super Duty Rear Axle JUNKYARD E Locker Swap!

My Ford 10.5" Sterling needed a locker... So I decided to retrofit a 2011+ super duty factory electric locker in to my older axle!

This is a factory electric locker swap from a junkyard axle or can be purchased as a Ford replacement part. I don't install a new ring and pinion here because I haven't bought them yet haha. be sure to check and adjust your gears after doing this swap!

For those of you wondering why not just swap the whole axle:

-Fewer gear ratios available for the 2011+ axles (only down to 4.88 vs 5.38s for the older axles)
-It's a metric lug pattern (8 on 170mm) for the newer vs the older (pre-1999) axles which are standard 8 on 6.5
-The ABS system for the older axle uses a tone ring on the carrier (same as my Dakota) while the newer axles use tone rings on the wheel hubs 👍

This locker fits in ALL of the previous Sterling 10.25/10.5" full float axles. Just takes some bolting, drilling, and some spare electrons!

Thanks for checking out the videos. Subscribe to keep track of what we're doing here!

Видео Super Duty Rear Axle JUNKYARD E Locker Swap! канала WebWheeler