Phased array of speakers
http://people.ece.cornell.edu/land/courses/ece4760/FinalProjects/s2012/tcj26_ecs227/tcj26_ecs227/index.html
For our ECE 4760 final project, we designed and built an array of 12 independently-controllable speakers to implement an acoustic phased-array system. The system samples a standard audio input signal at approximately 44.1 kHz, and then outputs this signal to each of 12 speakers, each with a variable delay. The idea behind a phased-array is that by changing how the speakers are driven the angle of the maximum intensity of the output wave can be shifted. This will be further explored in the high level design of the project. This type of array was built to be able to support various other more advanced design challenges, including longer-range acoustic modem transmission and sonar imaging.
Видео Phased array of speakers канала Bruce Land
For our ECE 4760 final project, we designed and built an array of 12 independently-controllable speakers to implement an acoustic phased-array system. The system samples a standard audio input signal at approximately 44.1 kHz, and then outputs this signal to each of 12 speakers, each with a variable delay. The idea behind a phased-array is that by changing how the speakers are driven the angle of the maximum intensity of the output wave can be shifted. This will be further explored in the high level design of the project. This type of array was built to be able to support various other more advanced design challenges, including longer-range acoustic modem transmission and sonar imaging.
Видео Phased array of speakers канала Bruce Land
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
![#7 keypad & state machine](https://i.ytimg.com/vi/MqqvdCabbFI/default.jpg)
![#18 Audio codec -- Floating point hardware](https://i.ytimg.com/vi/mTAcDftyYBs/default.jpg)
![#5 protothreads](https://i.ytimg.com/vi/uxrUtwanM4A/default.jpg)
![#6 Qsys and EBAB](https://i.ytimg.com/vi/g7m9U6FYfio/default.jpg)
![#20 lab 4 details/debugging](https://i.ytimg.com/vi/ShhYJ5UnQBk/default.jpg)
![#22 UART + writing project](https://i.ytimg.com/vi/NdST3uIKgcQ/default.jpg)
![3D Printer from scratch](https://i.ytimg.com/vi/VpcuJ80ww3I/default.jpg)
![#11 ODE solver and PTHREADS](https://i.ytimg.com/vi/CidmmBmHq7s/default.jpg)
![#14 DMA details lab 3](https://i.ytimg.com/vi/fLX9JnIL-W4/default.jpg)
![#13 -- Filters and isolators](https://i.ytimg.com/vi/e3LoyHpoOeI/default.jpg)
![#15 DMA, Vref DAC](https://i.ytimg.com/vi/Myr4Q3IJDUw/default.jpg)
![AirBass](https://i.ytimg.com/vi/XHtV47E0zYU/default.jpg)
![#1 course introduction](https://i.ytimg.com/vi/kn-CO8j3Fws/default.jpg)
![Lattice-Boltzmann fluid with moving source](https://i.ytimg.com/vi/AYJGSJmglx4/default.jpg)
![Latte art maker](https://i.ytimg.com/vi/13vBrB9hySc/default.jpg)
![mesh wifi nodes](https://i.ytimg.com/vi/KmMrYnuS6J4/default.jpg)
![#18 -- Final project discussion](https://i.ytimg.com/vi/rc4T6vlQ23Q/default.jpg)
![#2 hardware/software and lab 1](https://i.ytimg.com/vi/_vfid0ST_Jc/default.jpg)
![Edge contour plotter.](https://i.ytimg.com/vi/UoiOHu-NbZk/default.jpg)
![#11 -- 2D wave equation on FPGA](https://i.ytimg.com/vi/U_CBkcKtPF0/default.jpg)
![#10 -- Finger Plethysmograph and EMG](https://i.ytimg.com/vi/_P2w-RiCo1U/default.jpg)