Honda 3.5 Liter EVAP System Component Replacement

Installation Spotlight presents:
Honda 3.5 Liter EVAP System Component Replacement

This video demonstrates replacing the EVAP System Component for a 3.5 Liter application.

Level of difficulty: ADVANCED
Approximate installation time: 1.0 HOUR
Tools needed: 10 mm socket, 3/8" ratchet, Phillips screw driver
Additional parts: Canister vent solenoid, two-way valve, bypass valve, fuel vapor canister, pressure sensor

The 2 way valve, bypass solenoid, canister vent solenoid, and EVAP pressure sensor are all mounted on the canister assembly. In some areas, if one part is going to be serviced, all the components should be replaced.
Motorist: If this job is beyond your skill level, visit your automotive service professional.This video is for general information purposes only. The provider makes no representations or warranties as to the information contained in this video or its usage, completeness, quality or accuracy. Any use of such information is at the user's sole risk, and in no event shall the provider be liable for any consequential, incidental, special, punitive or direct or indirect damages arising from such use.

Featured Part Number: CP217

Visit us at: http://www.BWDBrand.com

Видео Honda 3.5 Liter EVAP System Component Replacement канала BWD Automotive