How to run Windows 10 diskless | NETVN

Install Windows Server
2. Assign static IP address to NIC
3. Using Server Manager, install iSCSI target feature
4. Create a disk folder to carry VHDX files, e.g. C:\iSCSIVirtualDisks
5. Share C:\iSCSIVirtualDisks folder with rear/write permission for client username
6. Download Windows 10 Image
https://www.ccboot.com/super-image.htm
7. Convert VHD to VHDX
Hyper-V
8. Set up iSCSI target LUN
- Use "existing VHDX" option to select Win10.VHDX
- Add MAC address of client to iSCSI initiator list
9. Download and set up Tiny PXE Server (Tiny PXE Server - reboot.pro)
http://reboot.pro/files/file/303-tiny-pxe-server/
10. Update iscsi.ipxe:
#!ipxe
set keep-san 1
echo keep-san: ${keep-san}
sanboot iscsi:(server IP)::::iqn.1991-05.com.microsoft:(server name)-win10-target
boot
Note:
- replace (server IP)with server static IP address: e.g. 192.168.0.100
- replace (server name) with server name. This name must match what the client sees within iSCSI Initiator
11. Update config.ini:
filename=ipxe-undionly.kpxe
altfilename=iscsi.ipxe
12. At Control Panel\System and Security\Windows Firewall\Allowed apps
- Enable iSCSI Service
- Add entry for pxesrv.exe
13. Click "Online" to launch pxesrv
14. Power up client and it should proceed to network boot
TP-Link 24 Port Gigabit Switch https://amzn.to/3Obs0ii
NETGEAR 24-Port Gigabit Switch https://amzn.to/3DyTDgt

Subscribe now because it's free https://www.youtube.com/c/NETVN82
#netvn #pc #diskless #windows10

Видео How to run Windows 10 diskless | NETVN канала NETVN82