🏅 Millsi's Turbo Barra Bedford | HALTECH HEROES
#motorsport #van #haltech #haltechhero
What would you do with an old, rusty, underpowered Bedford van? Well, if you're Millsi - you'd keep it looking old and rusty but stick a turbo Barra in it. The combo works surprisingly well and will no doubt surprise a few unassuming traffic light wannabe racers;)
Spoiler: Van made 480rwkw/650rwhp with wheel spin on 24psi. Millsi says there's more to come once he puts in a few more psi in and get it on a hub dyno.
Final dyno pull video: https://youtu.be/jIg1rWb5jUA
Check out the full build series of this project on The Skid Factory Channel: https://www.youtube.com/playlist?list=PLz2CNjb6s-b9bKXUzPFb7CrRh07zQiWE0
-----------------------------------------------------------
Liked this video? Here are more like it:
How Flex Fuel Works: https://youtu.be/KQcbaMIAjcs
How Dyno Tuning Works: https://youtu.be/rkcYDrwaJBg
How CO2 Boost Control Works: https://youtu.be/LyOhfDw54zo
--------------------------------------------------------
Don't miss out on our next video - subscribe to our channel.
--------------------------------------------------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: https://www.facebook.com/HaltechEngineManagement
Instagram: https://www.instagram.com/haltechecu
-~-~~-~~~-~~-~-
WATCH NEXT: "Throttle Pump aka Transient Throttle Enrichment Explained" https://www.youtube.com/watch?v=DMT9kVO7fUU
-~-~~-~~~-~~-~-
Видео 🏅 Millsi's Turbo Barra Bedford | HALTECH HEROES канала Haltech
What would you do with an old, rusty, underpowered Bedford van? Well, if you're Millsi - you'd keep it looking old and rusty but stick a turbo Barra in it. The combo works surprisingly well and will no doubt surprise a few unassuming traffic light wannabe racers;)
Spoiler: Van made 480rwkw/650rwhp with wheel spin on 24psi. Millsi says there's more to come once he puts in a few more psi in and get it on a hub dyno.
Final dyno pull video: https://youtu.be/jIg1rWb5jUA
Check out the full build series of this project on The Skid Factory Channel: https://www.youtube.com/playlist?list=PLz2CNjb6s-b9bKXUzPFb7CrRh07zQiWE0
-----------------------------------------------------------
Liked this video? Here are more like it:
How Flex Fuel Works: https://youtu.be/KQcbaMIAjcs
How Dyno Tuning Works: https://youtu.be/rkcYDrwaJBg
How CO2 Boost Control Works: https://youtu.be/LyOhfDw54zo
--------------------------------------------------------
Don't miss out on our next video - subscribe to our channel.
--------------------------------------------------------
For more Haltech goodness check out our:
Website: www.haltech.com
Facebook: https://www.facebook.com/HaltechEngineManagement
Instagram: https://www.instagram.com/haltechecu
-~-~~-~~~-~~-~-
WATCH NEXT: "Throttle Pump aka Transient Throttle Enrichment Explained" https://www.youtube.com/watch?v=DMT9kVO7fUU
-~-~~-~~~-~~-~-
Видео 🏅 Millsi's Turbo Barra Bedford | HALTECH HEROES канала Haltech
Показать
Комментарии отсутствуют
Информация о видео
Другие видео канала
1500HP 3.8L DE-STROKED BARRA IN A BEDFORD VAN!🤔 What's So Special About Ford's Barra? | TECHNICALLY SPEAKING |ULTIMATE SLEEPER - TURBO BARRA BEDFORD VAN🏅 Ray's 1000hp Street Civic - Haltech HeroesBEDFORD 1973 RANGE PROMOTIONAL FILM🛠 Tuning with Volumetric Efficiency and other VE fun facts | TECHNICALLY SPEAKING🛠 Mythbusting: Which is more important Air-Fuel Ratio OR Ignition Timing?🤔 What's so special about Nissan RB? | TECHNICALLY SPEAKING |Barra Bedford e85 Dyno run.Bedford CF Face-lift. Warts and all show round. Camper for sale.LIVE at Powercruise in Millsi Bedford Barra Van🏅 ASG Motorsports Twin Turbo Torana - Haltech HeroesTHE SKID FACTORY - Barra Powered Bedford Van [EP1]🏅 Benny's Barra-swapped, 1200hp, 8sec Mustang | HALTECH HEROESI Think I LOVE an Import... MightyCarMods Cresta Pulls🏅 Danny's 3500hp Blown Hemi Valiant | HALTECH HEROES |Barra Valve Springs and Oil Pump Gears Install Gas MotorCF bedford vansStarting my van after 9 months in storage